How to service the Neutral Safety Switch for the Automatic Transaxle-4T40-E/4T45-E on 2000 Chevrolet Cavalier?

First to service the transmission position switch/sensor for the automatic transaxle-4t40-e/4t45-e, disconnect the negative Battery Cable and also remove the shift linkage and the electrical connectors. After this, remove the park/neutral position switch mounting bolt and nut and the shift selector lever nut and the lever after that dismount the pnp switch. For installation, put the shaft of the shift in n (Neutral) and match the flats of the shift shaft to the switch. Mount the park/neutral position switch mounting bolt and nut to 24 nm (18 ft. Lbs.) and shift lever and nut. Once more, install the park/neutral position switch mounting bolt and nut and tighten the latter to 24 nm (18 ft. Lbs.) and reattach the shift linkage. Make sure that the engine will not be able to start unless it is positioned in the p (Park) or n (Neutral) until the negative battery is attached again.

OEM 2000 Chevrolet Cavalier Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Neutral Safety Switches found

View related parts
2000 Chevrolet Cavalier Neutral Safety Switch Part Number: 14094368
$14.91 MSRP: $24.54
You Save: $9.63 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch; Back Up Light Switch; Clutch Switch; Back-Up Switch; Transmission Safety Starting Switch; Engine Clutch Hydraulic Release; Cruise Control.
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 2.7 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 14094368
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Chevrolet Cavalier Neutral Safety Switch Part Number: 12450160
Product Specifications
- Other Name: Switch, Transmission Safety Starting Switch Or Speed Sensing; Switch, Transmission Safety Start/Warning
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.4 x 4.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12450160
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Base, LS, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2000 Chevrolet Cavalier Neutral Safety Switch Part Number: 12450161
Product Specifications
- Other Name: Switch, Transmission Safety Starting Switch Or Speed Sensing; Switch, Transmission Safety Start/Warning
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.0 x 7.1 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12450161
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2000 Chevrolet Cavalier Neutral Safety Switch

With a comprehensive array of OEM 2000 Chevrolet Cavalier Neutral Safety Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Cavalier Neutral Safety Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Cavalier Neutral Safety Switch Parts and Q&A

Q: How to service the Neutral Safety Switch for the Automatic Transaxle-4T40-E/4T45-E on 2000 Chevrolet Cavalier?
A: First to service the transmission position switch/sensor for the automatic transaxle-4t40-e/4t45-e, disconnect the negative Battery Cable and also remove the shift linkage and the electrical connectors. After this, remove the park/neutral position switch mounting bolt and nut and the shift selector lever nut and the lever after that dismount the pnp switch. For installation, put the shaft of the shift in n (Neutral) and match the flats of the shift shaft to the switch. Mount the park/neutral position switch mounting bolt and nut to 24 nm (18 ft. Lbs.) and shift lever and nut. Once more, install the park/neutral position switch mounting bolt and nut and tighten the latter to 24 nm (18 ft. Lbs.) and reattach the shift linkage. Make sure that the engine will not be able to start unless it is positioned in the p (Park) or n (Neutral) until the negative battery is attached again.