How to replace the power mirror switch on 2001 Chevrolet Malibu?

To replace the power mirror switch, start by using a small flat-bladed tool to release power accessory switch panel retainer from the door trim panel by releasing and pulling up starting at the front of the panel by pushing in with the flat tool. Following that, disconnect the electrical connector from the power mirror switch and remove the power mirror switch retainers to pull out the switch from the panel respectively. For the installation, press the power mirror switch into the retainer tabs until it reaches fully, and then plug the electrical connector to the switch. Finally, place the power accessory panel to the door trim panel by pressing until the retainers are fully seated.

OEM 2001 Chevrolet Malibu Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2001 Chevrolet Malibu Switch, Rear Part Number: 19259980
Product Specifications
- Other Name: Switch, Rear View Mirror; Window Switch
- Position: Rear
- Replaces: 22593369, 22606329
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 2.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19259980
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Malibu Submodels:
- Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS

2001 Chevrolet Malibu Mirror Switch

With a comprehensive array of OEM 2001 Chevrolet Malibu Mirror Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Malibu Mirror Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Malibu Mirror Switch Parts and Q&A

Q: How to replace the power mirror switch on 2001 Chevrolet Malibu?
A: To replace the power mirror switch, start by using a small flat-bladed tool to release power accessory switch panel retainer from the door trim panel by releasing and pulling up starting at the front of the panel by pushing in with the flat tool. Following that, disconnect the electrical connector from the power mirror switch and remove the power mirror switch retainers to pull out the switch from the panel respectively. For the installation, press the power mirror switch into the retainer tabs until it reaches fully, and then plug the electrical connector to the switch. Finally, place the power accessory panel to the door trim panel by pressing until the retainers are fully seated.