How to replace the emblem/nameplate on the pickup cab on 2002 Chevrolet Suburban 2500?

Apply tape to protect the pickup cab area before you heat the existing emblem. Then use the plastic tool to remove it. Place the heat gun J25070 at a distance of 152 mm or 6.0 inches from the emblem/nameplate surface to warm it for 30 seconds while moving in circular motions. Use a specific plastic tool to carefully remove the emblem/nameplate from the pickup cab panel surface. Then clean the front and back of the emblem/nameplate using a 3M scotch brite molding adhesive remover disk according to the instructions on the package or an equivalent method. Apply varnish making and painting naptha to clean the pickup cab panel area. Place tape to the specified dimensions if the emblem/nameplate location has no defined spot. Heat the pickup cabin surface using the gun to reach 21°C (70°F) but never touch the emblem adhesive pads during this process. Set the emblem/nameplate on the pickup panel with the front side while taking off its backing material. Press the emblem/nameplate throughout its surface to help bonding happen and check for good adherence before removing tape from the area around it.

OEM 2002 Chevrolet Suburban 2500 Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Emblems found

View related parts
2002 Chevrolet Suburban 2500 Emblem, Front Part Number: 12335633
$69.50 MSRP: $103.44
You Save: $33.94 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Replaces: 15706324
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.9 x 2.9 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12335633
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 2500 Submodels:
- Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
2002 Chevrolet Suburban 2500 Nameplate, Rear Part Number: 15126056
$60.07 MSRP: $89.40
You Save: $29.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration; Emblem, Radiator Grille And Front End Ornamentation
- Position: Rear
- Replaces: 15034749, 15053248, 15675118, 15982992, 15998983
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.9 x 16.9 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15126056
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 2500 Submodels:
- Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
2002 Chevrolet Suburban 2500 Nameplate, Rear Part Number: 15757310
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate, End Gate And Rear Door Decoration
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.1 x 2.3 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15757310
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 2500 Submodels:
- LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS

2002 Chevrolet Suburban 2500 Emblem

With a comprehensive array of OEM 2002 Chevrolet Suburban 2500 Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Suburban 2500 Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Suburban 2500 Emblem Parts and Q&A

Q: How to replace the emblem/nameplate on the pickup cab on 2002 Chevrolet Suburban 2500?
A: Apply tape to protect the pickup cab area before you heat the existing emblem. Then use the plastic tool to remove it. Place the heat gun J25070 at a distance of 152 mm or 6.0 inches from the emblem/nameplate surface to warm it for 30 seconds while moving in circular motions. Use a specific plastic tool to carefully remove the emblem/nameplate from the pickup cab panel surface. Then clean the front and back of the emblem/nameplate using a 3M scotch brite molding adhesive remover disk according to the instructions on the package or an equivalent method. Apply varnish making and painting naptha to clean the pickup cab panel area. Place tape to the specified dimensions if the emblem/nameplate location has no defined spot. Heat the pickup cabin surface using the gun to reach 21°C (70°F) but never touch the emblem adhesive pads during this process. Set the emblem/nameplate on the pickup panel with the front side while taking off its backing material. Press the emblem/nameplate throughout its surface to help bonding happen and check for good adherence before removing tape from the area around it.