Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
Indianapolis 500 Pace Car, LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS
Other Name: Mount Assembly-Transmission *Orange; Transfer Case Mount; Mount, Transmission Mounting
Replaces: 22178939, 22173073
Item Weight: 2.30 Pounds
Item Dimensions: 7.1 x 6.4 x 4.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 22146834
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2004 Chevrolet Monte Carlo Submodels:
LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS
2004 Chevrolet Monte Carlo Motor And Transmission Mount
With a comprehensive array of OEM 2004 Chevrolet Monte Carlo Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Monte Carlo Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2004 Chevrolet Monte Carlo Parts Questions & Experts Answers
Q: How to replace the automatic Motor and Transmission Mount on 2004 Chevrolet Monte Carlo?
A: Vehicle elevation and suspension are needed before starting to remove the left tire assembly and wheel and additional removal of the left inner splash shield. A transmission jack needs to be placed under the transaxle while you remove the upper transaxle mount nuts from the transaxle bracket before you slowly raise the transaxle assembly. Afterward start removing the frame-mounted lower transaxle mount nuts while also removing the transaxle mount from the frame. Align the transaxle mount with the frame and apply transaxle mount lower nuts which require torque to 63 nm (46 ft. Lbs.). Secure the transaxle mount studs into the transaxle bracket opening before installing the transaxle mount upper bolts and torque them to 47 nm (35 ft. Lbs.). After removing the transmission jack reinstall the left inner splash shield and reposition the left wheel and tire assembly before lowering the vehicle.