How to replace the Antenna Cable from the radio to the module on 2005 Chevrolet Tahoe?

The first step to replace the radio antenna module cable connecting radio to module requires removal of I/P trim and lowering the headliner. Begin by disconnecting the electrical connector from the radio antenna module by loosening the mounting bolt for it. Then remove cable from the radio antenna module. Start by removing cable clips from the roof and A-pillar before disconnecting cable from the radio and the electrical wire connector . Before putting back the radio cable, secure cable clips at the A-pillar positions then link the electrical wire connector. After connecting cable to the radio previously install cable clips to the roof structure. Install the bolt fastening the radio antenna module to the roof using 9 N.m (80 lb in) torque. Once complete, connect cable to both the radio antenna module and wire connector to the radio antenna module. To finish up install the headliner along with the I/P trim panel.

OEM 2005 Chevrolet Tahoe Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Antenna Cables found

View related parts
2005 Chevrolet Tahoe Antenna Cable Part Number: 15829166
$19.91 MSRP: $35.56
You Save: $15.65 (45%)
Product Specifications
- Other Name: Cable, Radio Antenna; Cable
- Replaces: 15727371, 15052357, 15074562
- Item Weight: 0.40 Pounds
- Item Dimensions: 11.2 x 7.4 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15829166
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Tahoe Submodels:
- Base, Limited, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
View related parts
2005 Chevrolet Tahoe Antenna Cable Part Number: 15094673
Product Specifications
- Other Name: Cable, Radio Antenna; Extension
- Item Weight: 0.50 Pounds
- Item Dimensions: 7.2 x 7.4 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15094673
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Tahoe Submodels:
- Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2005 Chevrolet Tahoe Cable Part Number: 88987710
$36.23 MSRP: $64.70
You Save: $28.47 (44%)
Product Specifications
- Other Name: Cable, Navigation Antenna Coaxial; Cable, Vehicle Navigation/Information
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.6 x 4.5 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88987710
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Tahoe Submodels:
- Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

2005 Chevrolet Tahoe Antenna Cable

With a comprehensive array of OEM 2005 Chevrolet Tahoe Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Tahoe Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Tahoe Antenna Cable Parts and Q&A

Q: How to replace the Antenna Cable from the radio to the module on 2005 Chevrolet Tahoe?
A: The first step to replace the radio antenna module cable connecting radio to module requires removal of I/P trim and lowering the headliner. Begin by disconnecting the electrical connector from the radio antenna module by loosening the mounting bolt for it. Then remove cable from the radio antenna module. Start by removing cable clips from the roof and A-pillar before disconnecting cable from the radio and the electrical wire connector . Before putting back the radio cable, secure cable clips at the A-pillar positions then link the electrical wire connector. After connecting cable to the radio previously install cable clips to the roof structure. Install the bolt fastening the radio antenna module to the roof using 9 N.m (80 lb in) torque. Once complete, connect cable to both the radio antenna module and wire connector to the radio antenna module. To finish up install the headliner along with the I/P trim panel.