How to replace the front brake line on 2005 Chevrolet Venture?

Start by elevating and supporting the vehicle before removing the tire-wheel assembly for front brake hose replacement. Install a rubber cap or plug on the exposed brake pipe fitting to stop fluid loss and contamination after cleaning all dirt from brake hose and fittings. Brittle the brake pipe fitting loose from the brake hose by using a flat-bladed tool to disconnect the brake hose retainer from the brake hose. Start by removing the brake hose bolt from the brake caliper before disconnecting the brake hose from the brake caliper. The removal of existing gaskets between the brake hose ends and the two copper brake hose gaskets from the caliper should be discarded. Afterward install the rubber plug into the brake caliper's brake hose bolt hole to avoid fluid leakage. Installation of new brake hoses requires removing the rubber plug first while using new copper brake hose gaskets with the brake hose bolt to secure the hose to the brake caliper at a torque of 54 nm (40 ft. Lbs.). Follow the hose stripe to position the brake hose directly into the brake hose bracket's notch. Secure the brake hose to its proper position on the brake hose bracket then return the brake hose retainer into place on the brake hose. Before installation connect the brake hose to the brake pipe fitting by removing its rubber cap then torque the fitting up to 21 nm (15 ft. Lbs.). The vehicle must stay stationary until a secure brake pedal develops because brake system air could result in failure. The last step involves bleeding the caliper brake at the bleeder screw before replacing the tire and handling the wheel assembly and lowering the vehicle.

OEM 2005 Chevrolet Venture Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Lines found

View related parts
2005 Chevrolet Venture Flex Hose, Driver Side Part Number: 22163427
$12.93 MSRP: $50.22
You Save: $37.29 (75%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 17.2 x 2.3 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163427
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Flex Hose, Passenger Side Part Number: 22163428
$14.65 MSRP: $47.78
You Save: $33.13 (70%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 18.9 x 4.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163428
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Flex Hose, Rear Part Number: 17999811
Product Specifications
- Other Name: Hose, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Item Weight: 1.20 Pounds
- Item Dimensions: 15.7 x 3.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17999811
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Flex Hose Part Number: 22163432
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 10.1 x 3.7 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163432
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- LS, LT, Plus | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Flex Hose Part Number: 22163431
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 10.3 x 3.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163431
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- LS, LT, Plus | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Flex Hose, Passenger Side Part Number: 10343495
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 18.4 x 7.7 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10343495
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- LS, LT, Plus | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Flex Hose Part Number: 17999810
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Item Weight: 1.20 Pounds
- Item Dimensions: 11.9 x 4.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17999810
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2005 Chevrolet Venture Brake Line

With a comprehensive array of OEM 2005 Chevrolet Venture Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Venture Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Venture Brake Line Parts and Q&A

Q: How to replace the front brake line on 2005 Chevrolet Venture?
A: Start by elevating and supporting the vehicle before removing the tire-wheel assembly for front brake hose replacement. Install a rubber cap or plug on the exposed brake pipe fitting to stop fluid loss and contamination after cleaning all dirt from brake hose and fittings. Brittle the brake pipe fitting loose from the brake hose by using a flat-bladed tool to disconnect the brake hose retainer from the brake hose. Start by removing the brake hose bolt from the brake caliper before disconnecting the brake hose from the brake caliper. The removal of existing gaskets between the brake hose ends and the two copper brake hose gaskets from the caliper should be discarded. Afterward install the rubber plug into the brake caliper's brake hose bolt hole to avoid fluid leakage. Installation of new brake hoses requires removing the rubber plug first while using new copper brake hose gaskets with the brake hose bolt to secure the hose to the brake caliper at a torque of 54 nm (40 ft. Lbs.). Follow the hose stripe to position the brake hose directly into the brake hose bracket's notch. Secure the brake hose to its proper position on the brake hose bracket then return the brake hose retainer into place on the brake hose. Before installation connect the brake hose to the brake pipe fitting by removing its rubber cap then torque the fitting up to 21 nm (15 ft. Lbs.). The vehicle must stay stationary until a secure brake pedal develops because brake system air could result in failure. The last step involves bleeding the caliper brake at the bleeder screw before replacing the tire and handling the wheel assembly and lowering the vehicle.