How to replace the Radius Heat Shield on 2005 Chevrolet Venture?

Vehicle elevation followed by suitable platform attachment is required as the first step to replace the power steering gear heat shield. Vehicle owners with all wheel drive must remove the right side engine splash shield before accessing the heat shield. You should begin by taking off the heat shield bolts from the steering gear and then unfastening the whole heat shield. Put the steering gear heat shield into position first before installation and follow the fastener notice in service precautions when doing so. Fit the steering gear heat shield bolts before you tighten them to 14 nm (124 lb ft). After lowering the vehicle, all wheel drive vehicles need to have the right side engine splash shield reinstalled.

OEM 2005 Chevrolet Venture Radius Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Radius Heat Shield found

View related parts
2005 Chevrolet Venture Heat Shield Part Number: 10259200
Product Specifications
- Other Name: Shield, Steering Gear Mounting; Power Steering Hose; Power Steering Pressure Hose; Pressure Hose
- Replaces: 10445224
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.2 x 5.1 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10259200
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2005 Chevrolet Venture Radius Heat Shield

With a comprehensive array of OEM 2005 Chevrolet Venture Radius Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Venture Radius Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Venture Radius Heat Shield Parts and Q&A

Q: How to replace the Radius Heat Shield on 2005 Chevrolet Venture?
A: Vehicle elevation followed by suitable platform attachment is required as the first step to replace the power steering gear heat shield. Vehicle owners with all wheel drive must remove the right side engine splash shield before accessing the heat shield. You should begin by taking off the heat shield bolts from the steering gear and then unfastening the whole heat shield. Put the steering gear heat shield into position first before installation and follow the fastener notice in service precautions when doing so. Fit the steering gear heat shield bolts before you tighten them to 14 nm (124 lb ft). After lowering the vehicle, all wheel drive vehicles need to have the right side engine splash shield reinstalled.