How to replace the front coil springs on 2006 Chevrolet Silverado 1500?

Raise and support vehicle. Remove engine shield, wheel/tire, shock absorber, and stabilizer link. Attach Coil Spring Compressor Adapter J 23028-15 and Coil Spring Remover/Installer J 23028-A to transmission jack, relieve spring tension, remove control arm pivot bolts, then coil spring/insulator. Reverse procedure to install, tighten pivot nuts, reinstall components, lower vehicle.

OEM 2006 Chevrolet Silverado 1500 Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coil Springs found

View related parts
2006 Chevrolet Silverado 1500 Coil Spring, Front Part Number: 15032650
$145.70 MSRP: $261.34
You Save: $115.64 (45%)
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 15760839
- Item Weight: 19.60 Pounds
- Item Dimensions: 18.9 x 12.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15032650
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2006 Chevrolet Silverado 1500 Coil Springs

With a comprehensive array of OEM 2006 Chevrolet Silverado 1500 Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Silverado 1500 Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Silverado 1500 Coil Springs Parts and Q&A

Q: How to replace the front coil springs on 2006 Chevrolet Silverado 1500?
A: Raise and support vehicle. Remove engine shield, wheel/tire, shock absorber, and stabilizer link. Attach Coil Spring Compressor Adapter J 23028-15 and Coil Spring Remover/Installer J 23028-A to transmission jack, relieve spring tension, remove control arm pivot bolts, then coil spring/insulator. Reverse procedure to install, tighten pivot nuts, reinstall components, lower vehicle.