Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Buick Rendezvous Antenna Cable

Radio Antenna Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Antenna Cable found

  • 2007 Buick Rendezvous Antenna Cable - 10445212
    2007 Buick Rendezvous Antenna Cable Diagram - 10445212
    View related parts

    2007 Buick Rendezvous Antenna Cable Part Number: 10445212

    Product Specifications
    • Other Name: Cable Assembly-Radio Antenna Cable Extension; Cable; Cable, Radio Antenna
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 44.0 x 1.6 x 0.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 10445212
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2007 Buick Rendezvous Submodels:
    • CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2007 Buick Rendezvous Antenna Cable

With a comprehensive array of OEM 2007 Buick Rendezvous Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rendezvous Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Rendezvous Antenna Cable Parts and Q&A

  • Q: How to replace the digital radio antenna cable on 2007 Buick Rendezvous?
    A: To replace the digital radio Antenna Cable one starts by removing the headliner then disconnect the Antenna Cable from antenna base cable connector followed by removing Antenna Cable clips. Then remove the right side end cap from the instrument panel (I/P) while disconnecting the cable connectors, disconnecting the Antenna Cable off the digital radio receiver and removing the Antenna Cable retainers from the receiver bracket. After disconnecting the Antenna Cable, you install the Antenna Cable retainers onto the receiver bracket and plug in the Antenna Cable to the digital radio receiver. Go ahead and install the cable connectors to the right side end cap on the i/p and install the right rear compartment, trim panel and Antenna Cable retainer clips fit. Finally, connect the Antenna Cable to the antenna base cable and reinstall headliner.

Related 2007 Buick Rendezvous Parts

Alternate Year Models

+
2006 Buick Rendezvous Antenna Cable