How to replace the water pump pulley on 2007 Cadillac DTS?

You need to free the outer water pump Drive Belt tensioner before taking off its Drive Belt and Water Pump Pulley. You can remove the end cap from the intake Camshaft with ease before utilizing the power steering and Water Pump Pulley remover (J 38825) to detach the water pump drive pulley from the intake Camshaft. Put the water pump drive pulley on the intake Camshaft then snap it into place using the Water Pump Pulley installer j 38823 until it hits the Camshaft at the right depth as indicated by the tool's lower edge. Install the Camshaft end cap and fasten it at 2 n.m (18 lb in). Then put the water pump Drive Belt into position.

OEM 2007 Cadillac DTS Water Pump Pulley

Engine Water Pump Pulley

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Water Pump Pulley found

View related parts
2007 Cadillac DTS Pump Pulley Part Number: 3535846
$105.75 MSRP: $111.96
You Save: $6.21 (6%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley, Water Pump; Serpentine Belt Drive Kit; Water Pump Pulley; Pulley; Pulley, Fan And Coolant Pump
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.2 x 5.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3535846
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2007 Cadillac DTS Water Pump Pulley

With a comprehensive array of OEM 2007 Cadillac DTS Water Pump Pulley, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac DTS Water Pump Pulley are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac DTS Water Pump Pulley Parts and Q&A

Q: How to replace the water pump pulley on 2007 Cadillac DTS?
A: You need to free the outer water pump Drive Belt tensioner before taking off its Drive Belt and Water Pump Pulley. You can remove the end cap from the intake Camshaft with ease before utilizing the power steering and Water Pump Pulley remover (J 38825) to detach the water pump drive pulley from the intake Camshaft. Put the water pump drive pulley on the intake Camshaft then snap it into place using the Water Pump Pulley installer j 38823 until it hits the Camshaft at the right depth as indicated by the tool's lower edge. Install the Camshaft end cap and fasten it at 2 n.m (18 lb in). Then put the water pump Drive Belt into position.