How to replace the exhaust heat shield on the dash panel on 2008 Cadillac Escalade ESV?

Vehicle support will be necessary before starting the Exhaust Heat Shield dash panel replacement. Start by removing shield bolts from the engine area followed by removing the shield itself when necessary. Vehicle owners operating a 1500 series model should begin by removing the skid plate bolts and the skid plate itself if a unit is present. The oil pan skid plate requires bolt removal starting with 2 rear bolts that need loosening on 2500 series vehicles. The 2 front oil pan skid plate bolts and skid plate must be removed for this equipment. Before proceeding with the work please detach the Catalytic Converter if it is needed. The first step requires you to remove the dash panel Exhaust Heat Shield nuts either in pairs or groups of four before removing the dash panel Exhaust Heat Shield pieces one or three from their studs on the dash panel. When installing the dash panel Exhaust Heat Shield (1 or 3) secure its studs using nuts (2 or 4) while tightening them to 9 n.m (80 lb in). Follow the procedure to put back the Catalytic Converter (if needed). The 2500 series requires installation of the oil pan skid plate following a process where the 2 rear plate bolts get tightened to 28 n.m (21 lb ft), while the front skid plate bolts get installed if equipment allows with a 28 n.m (21 lb ft) torque setting. The 1500 series vehicles require mounting their oil pan skid plate followed by bolt installation if equipped to 28 n.m (21 lb ft). Lower the vehicle then position the engine shield onto the frame and install and tighten its bolts to 20 n.m (15 lb ft).

OEM 2008 Cadillac Escalade ESV Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Exhaust Heat Shields found

View related parts
2008 Cadillac Escalade ESV Heat Shield, Driver Side Part Number: 12562243
$75.43 MSRP: $98.10
You Save: $22.67 (24%)
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Position: Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 9.2 x 3.4 x 20.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12562243
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac Escalade ESV Submodels:
- Base, Luxury, Platinum, Premium | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2008 Cadillac Escalade ESV Heat Shield, Passenger Side Part Number: 12677664
$80.16 MSRP: $119.28
You Save: $39.12 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Replaces: 12648338
- Item Weight: 3.20 Pounds
- Item Dimensions: 21.8 x 10.4 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12677664
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac Escalade ESV Submodels:
- Base, Luxury, Platinum, Premium | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2008 Cadillac Escalade ESV Heat Shield, Front Passenger Side Part Number: 23498620
$61.61 MSRP: $91.69
You Save: $30.08 (33%)
ADD TO CART
Product Specifications
- Other Name: Shield Assembly-Front Body Exhaust Heat; Exhaust Heat Shield; Shield, Exhaust Pipe
- Position: Front Passenger Side
- Replaces: 15804782, 15782417, 15893979, 23120901, 25988380, 15804781, 20883209
- Item Weight: 1.00 Pounds
- Item Dimensions: 49.5 x 5.1 x 16.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23498620
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac Escalade ESV Submodels:
- Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2008 Cadillac Escalade ESV Heat Shield, Rear Driver Side Part Number: 15102076
$23.72 MSRP: $37.11
You Save: $13.39 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Assembly-Exhaust Heat (At Rear Floor Panel); Exhaust Heat Shield; Shield, Exhaust Tail Pipe
- Position: Rear Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.4 x 11.6 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15102076
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac Escalade ESV Submodels:
- Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2008 Cadillac Escalade ESV Heat Shield Part Number: 22869577
$15.69 MSRP: $23.35
You Save: $7.66 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield
- Replaces: 15853611, 25848480
- Item Weight: 2.70 Pounds
- Item Dimensions: 53.7 x 17.7 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22869577
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac Escalade ESV Submodels:
- Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2008 Cadillac Escalade ESV Heat Shield, Passenger Side Part Number: 25848478
Product Specifications
- Other Name: Shield-Exhaust Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Replaces: 10388867, 15797116
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.7 x 9.3 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25848478
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac Escalade ESV Submodels:
- Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2008 Cadillac Escalade ESV Heat Shield, Front Driver Side Part Number: 15169245
Product Specifications
- Other Name: Shield Assembly-Exhaust Front Heat (At Front Floor Panel); Exhaust Heat Shield; Shield, Exhaust Pipe
- Position: Front Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.6 x 7.7 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15169245
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac Escalade ESV Submodels:
- Base, Platinum | 8 Cyl 6.2 L GAS
View related parts
2008 Cadillac Escalade ESV Heat Shield, Driver Side Part Number: 25848476
Product Specifications
- Other Name: Shield-Exhaust Heat; Exhaust Heat Shield; Shield, Exhaust Manifold; Shield, Exhaust Pipe
- Position: Driver Side
- Replaces: 15169247
- Item Weight: 1.30 Pounds
- Item Dimensions: 10.7 x 8.9 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25848476
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac Escalade ESV Submodels:
- Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2008 Cadillac Escalade ESV Exhaust Heat Shield

With a comprehensive array of OEM 2008 Cadillac Escalade ESV Exhaust Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac Escalade ESV Exhaust Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac Escalade ESV Exhaust Heat Shield Parts and Q&A

Q: How to replace the exhaust heat shield on the dash panel on 2008 Cadillac Escalade ESV?
A: Vehicle support will be necessary before starting the Exhaust Heat Shield dash panel replacement. Start by removing shield bolts from the engine area followed by removing the shield itself when necessary. Vehicle owners operating a 1500 series model should begin by removing the skid plate bolts and the skid plate itself if a unit is present. The oil pan skid plate requires bolt removal starting with 2 rear bolts that need loosening on 2500 series vehicles. The 2 front oil pan skid plate bolts and skid plate must be removed for this equipment. Before proceeding with the work please detach the Catalytic Converter if it is needed. The first step requires you to remove the dash panel Exhaust Heat Shield nuts either in pairs or groups of four before removing the dash panel Exhaust Heat Shield pieces one or three from their studs on the dash panel. When installing the dash panel Exhaust Heat Shield (1 or 3) secure its studs using nuts (2 or 4) while tightening them to 9 n.m (80 lb in). Follow the procedure to put back the Catalytic Converter (if needed). The 2500 series requires installation of the oil pan skid plate following a process where the 2 rear plate bolts get tightened to 28 n.m (21 lb ft), while the front skid plate bolts get installed if equipment allows with a 28 n.m (21 lb ft) torque setting. The 1500 series vehicles require mounting their oil pan skid plate followed by bolt installation if equipped to 28 n.m (21 lb ft). Lower the vehicle then position the engine shield onto the frame and install and tighten its bolts to 20 n.m (15 lb ft).