How to replace the defroster Blend Door Actuator on 2008 Chevrolet Uplander?

To replace the defroster actuator you need to un-install a drive side knee bolster, then it's located the defrost actuator; its electrical connector is disconnected. Next, unscrew/bolt out the screws securing defrost actuator and remove it. To install, start with putting the defrost actuator back in place, with following up on the Fastener Notice for the right fastening. Tighten the bolts/screws to 1.2 N.m (11 lb in). Reconnect the electrical connector for the defrost actuator and install the driver side knee bolster lastly and recalibrate the actuators if necessary.

OEM 2008 Chevrolet Uplander Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blend Door Actuators found

View related parts
2008 Chevrolet Uplander Actuator Part Number: 10364929
$19.10 MSRP: $35.86
You Save: $16.76 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; Actuator, A/C Vacuum Control; Actuator, A/C Control
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 3.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10364929
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Uplander Actuator Part Number: 10362449
$34.78 MSRP: $76.44
You Save: $41.66 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator, A/C Vacuum Control; Actuator, A/C Control
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.1 x 3.6 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10362449
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2008 Chevrolet Uplander Blend Door Actuator

With a comprehensive array of OEM 2008 Chevrolet Uplander Blend Door Actuator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander Blend Door Actuator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Uplander Blend Door Actuator Parts and Q&A

Q: How to replace the defroster Blend Door Actuator on 2008 Chevrolet Uplander?
A: To replace the defroster actuator you need to un-install a drive side knee bolster, then it's located the defrost actuator; its electrical connector is disconnected. Next, unscrew/bolt out the screws securing defrost actuator and remove it. To install, start with putting the defrost actuator back in place, with following up on the Fastener Notice for the right fastening. Tighten the bolts/screws to 1.2 N.m (11 lb in). Reconnect the electrical connector for the defrost actuator and install the driver side knee bolster lastly and recalibrate the actuators if necessary.