Other Name: Bulb, Front Turn Signal Lamp; Turn Signal Bulbs; Tail Light Bulbs; Car Bulbs; Bulbs for Parking, Marker, High Mount, Exterior, License, Turn Signal, Chassis, Courtesy, Headlamp, Tail
Position: Front
Item Weight: 0.40 Pounds
Item Dimensions: 4.2 x 4.3 x 4.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 9442399
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Other Name: Bulb, Front Turn Signal Lamp; Daytime Running Light Bulb; Parking Light Bulb; Turn Signal Bulbs; Car Bulbs; Tail Lamp Bulb; Signal Lamp Bulb; Exterior Bulbs; Run Lamp Bulb; Stoplamp Bulb; Bulb; Standard Parts
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
2009 GMC Canyon Headlight Bulb
With a comprehensive array of OEM 2009 GMC Canyon Headlight Bulb, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Canyon Headlight Bulb are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 GMC Canyon Headlight Bulb Parts and Q&A
Q: How to replace the front headlight bulb on 2009 GMC Canyon?
A: The procedure to replace the headlamp bulb begins with turning the headlamp switch off and placing the ignition switch in the lock setting. Begin by taking out the front grille followed by its retaining bolts which secure the headlamp unit. To remove the bulb you should first push and rotate the high beam headlamp as well as the low beam headlamp one quarter turn counterclockwise before disconnecting the electrical connector. Connect the electrical connector to the new bulb before pushing the high beam headlamp and low beam headlamp into place while rotating them clockwise a quarter turn to complete installation. Use an 10 nm torque wrench to fasten the bolts which attach the headlamp before testing its functionality to warrant front grille reinstallation. Manual handling of halogen bulbs needs glass protection and keeping bulbs dry as well as clean because improper maintenance creates danger of explosions.