How to service and repair the control arm bushing in the rear suspension on Buick LeSabre?

A technician must take the Control Arm out of the vehicle before performing repair work on its rear suspension bushing. Attach the puller bolt/thrust bearing (J21474-19) through the bushing remover (J41014-1) to create a tool assembly over the bushing against the Control Arm surface. Use high pressure lubricant (J23444-A) to treat the threads on the bolt. Put the bushing remover (J22222-2) with its small end pointing at the bushing while installing the long nut (J21474-18) onto the puller bolt/thrust bearing (J21474-19). Apply torque to the long nut (J21474-18) until the bushing pops out of the Control Arm then remove the bushing installation tools. To install the new bushing settle it vertically onto the Control Arm with the flat surface facing upward toward the rear of the assembly. Next place the puller bolt/thrust bearing (J21474-19) through the bushing receiver (J41014-2) while positioning it over the bushing against the Control Arm. Apply high pressure lubricant (J23444-A) along the threads of the bolt. First install the bushing installer (J28685) with its large end point toward the bushing and the long nut (J21474-18) onto the puller bolt/thrust bearing (J21474-19). Tighten the puller bolt/thrust bearing (J21474-19) to push the bushing completely into the Control Arm position but stop short of final tightening. After removing the bushing tools you should install the Control Arm onto the frame.

OEM Buick LeSabre Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Control Arm Bushings found

View related parts
Buick LeSabre Control Arm Bushing, Lower Part Number: 351286
$13.11
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Axle Pivot Bushing; Lower Control Arm Bushing; Front Bushing; Lower Bushing; Steering Knuckle Bushing.
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Buick LeSabre | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Control Arm Bushing, Front Upper Part Number: 371793
$7.94 MSRP: $12.44
You Save: $4.50 (37%)
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Upper Control Arm; Axle Pivot Bushing; Axle Beam Mount; Upper Control Arm Bushing; Upper Bushing; Bushing; Bushings; Bushing, Steering Knuckle Upper Control Arm
- Position: Front Upper
- Replaced by: 14020223
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Buick LeSabre | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Control Arm Bushing, Upper Part Number: 14020223
$7.94 MSRP: $12.44
You Save: $4.50 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Steering Knuckle Upper Control Arm; Suspension Control Arm Bushing; Axle Pivot Bushing; Axle Beam Mount; Upper Control Arm Bushing; Upper Bushing; Control Arm Bushings; Upper Control Arm Shaft Bushing.
- Position: Upper
- Replaces: 00371793, 371793
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Buick LeSabre | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Control Arm Bushing, Front Lower Part Number: 25526640
$13.72 MSRP: $27.55
You Save: $13.83 (51%)
ADD TO CART
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Axle Pivot Bushing; Lower Control Arm Bushing; Lower Control Arm Rear Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1999 Buick LeSabre | Base, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Control Arm Bushing, Front Lower Part Number: 14041609
Product Specifications
- Other Name: Bushing Assembly-Steering Knuckle Lower Control Arm Front; Suspension Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Bushing; Rear & Front Bushings; Steering Knuckle Bushing.
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Buick LeSabre | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Control Arm Bushing, Rear Part Number: 25557622
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Suspension Control Arm Bushing; Axle Support Bushing; Axle Beam Mount; Lower Control Arm Bushing; Bushings
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Bushings, Orange, Rear Part Number: 10000952
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Suspension Control Arm Kit; Axle Support Bushing; Beam Mount
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Buick LeSabre | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Lower Control Arm Bushing, Rear Part Number: 25530493
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Suspension Control Arm Kit; Axle Support Bushing; Beam Mount; Lower Control Arm Rear Bushing
- Position: Rear
- Replaces: 25530492
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Lower Control Arm Bushing, Rear Part Number: 25530489
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Suspension Control Arm Kit; Axle Support Bushing; Beam Mount; Lower Control Arm Front Bushing
- Position: Rear
- Replaces: 25530488
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Control Arm Bushing, Front Lower Part Number: 25526641
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Suspension Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Bushing; Lower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1999 Buick LeSabre | Base, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Control Arm Bushing, Green, Rear Part Number: 10000953
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Suspension Control Arm Bushing Kit; Axle Support Bushing; Axle Beam Mount; Bushings
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Buick LeSabre | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL

Buick LeSabre Control Arm Bushing

Want to cut long-term maintenance and repair costs? Choose OEM Control Arm Bushing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick LeSabre parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick LeSabre Control Arm Bushing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Buick LeSabre Control Arm Bushing is a compatible spare part of the suspension system and it runs well on several LeSabre models from 1959 to 2005. This critical part is situated at the center of control arms that must rotate and move as a result of the prevailing road conditions or in line with the steering inputs given by the driver. Another advantage offers the Control Arm Bushing threaded metal tubes and filled with insulation material, damping characteristics and reduce the amount of friction. The Buick LeSabre Control Arm Bushing is available in various materials; rubber, steel and polyurethane that fit the different needs of the driver and vehicle- be it standard on-road use or off-road. To keep the upper and lower suspension working properly and for retaining sound structure of the wheel assembly, which significantly has impacts on the safety of the car, replacement or repairs are essential after the bushings get worn out. Thus, the Buick LeSabre is widely known for its durability and power, which results from the high-quality Control Arm Bushing that exists in the market. In proving Buick LeSabre Control Arm Bushing prowess on engineering, this part offers not only the improved car's maneuverability but also improved surface padding for a smoother ride permitting drivers enjoy the Buick LeSabre to the fullest. In conclusion, the Buick LeSabre Control Arm Bushing is one of the significant components and symbolizes the car model's experience and performance.

Buick LeSabre Control Arm Bushing Parts and Q&A

Control Arm Bushing, Rear
25557622
Q: How to service and repair the control arm bushing in the rear suspension on Buick LeSabre?
A:
A technician must take the Control Arm out of the vehicle before performing repair work on its rear suspension bushing. Attach the puller bolt/thrust bearing (J21474-19) through the bushing remover (J41014-1) to create a tool assembly over the bushing against the Control Arm surface. Use high pressure lubricant (J23444-A) to treat the threads on the bolt. Put the bushing remover (J22222-2) with its small end pointing at the bushing while installing the long nut (J21474-18) onto the puller bolt/thrust bearing (J21474-19). Apply torque to the long nut (J21474-18) until the bushing pops out of the Control Arm then remove the bushing installation tools. To install the new bushing settle it vertically onto the Control Arm with the flat surface facing upward toward the rear of the assembly. Next place the puller bolt/thrust bearing (J21474-19) through the bushing receiver (J41014-2) while positioning it over the bushing against the Control Arm. Apply high pressure lubricant (J23444-A) along the threads of the bolt. First install the bushing installer (J28685) with its large end point toward the bushing and the long nut (J21474-18) onto the puller bolt/thrust bearing (J21474-19). Tighten the puller bolt/thrust bearing (J21474-19) to push the bushing completely into the Control Arm position but stop short of final tightening. After removing the bushing tools you should install the Control Arm onto the frame.