How to replace the idler arm on Chevrolet Avalanche 2500?

To change the idle arm, you will need the following tools Universal Steering Linkage Puller (J24319-B), Steering Linkage Installer (12 mm) (J29193), and Steering Linkage Installer (14 mm) (J29194). Start by lifting the car and take off the engine protection shield if applicable. Next, unscrew the idler arm ball stud nut but avoid reusing it and then unplug the idler arm off the relay rod using Universal Steering Linkage Puller (&24319-B). Go ahead and remove the idler arm frame bolts and nuts and then the idler arm from the vehicle. For installation place the new idler arm on the frame, then put the frame bolts and nuts and tighten the bolts to 99 Nm (73 ft. lbs.). Connect relay rod to idler arm ball stud, seal should be on the stud, use Steering Linkage Installer (12mm) J29193 or Steering Linkage Installer (14mm) J29194 to seat the tapers, tighten to 54Nm(40ft lbs). Assemble a new idler arm ball stud prevailing torque nut to the idler arm ball stud and provide a torque of 62 Nm (46 ft. lbs.). Finally, if equipped, reinstall the engine protection shield, resituate the vehicle, and perform a wheel alignment check.

OEM Chevrolet Avalanche 2500 Idler Arm

Steering Idler Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Idler Arms found

View related parts
Chevrolet Avalanche 2500 Idler Arm Part Number: 19149615
$90.68 MSRP: $154.38
You Save: $63.70 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Steering Linkage Idler; Pitman Arm
- Replaced by: 85819770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Chevrolet Avalanche 2500 | Base | 8 Cyl 8.1 L GAS
View related parts
Chevrolet Avalanche 2500 Idler Arm Part Number: 15891516
$144.36 MSRP: $245.79
You Save: $101.43 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Steering Linkage Idler; Steering Idler Arm; Pitman Arm
- Replaced by: 19435543
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche 2500 | Base, LS, LT | 8 Cyl 8.1 L GAS
View related parts
Chevrolet Avalanche 2500 Pitman Arm Part Number: 12479051
$45.98 MSRP: $112.19
You Save: $66.21 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Pitman; Steering Pitman Arm; Idler Arm
- Replaced by: 85819774
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche 2500 | Base, LS, LT | 8 Cyl 8.1 L GAS
View related parts
Chevrolet Avalanche 2500 Pitman Arm Part Number: 12471379
$90.68 MSRP: $154.38
You Save: $63.70 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Pitman; Idler Arm
- Replaced by: 85819770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Chevrolet Avalanche 2500 | Base | 8 Cyl 8.1 L GAS

Chevrolet Avalanche 2500 Idler Arm

Want to cut long-term maintenance and repair costs? Choose OEM Idler Arm. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Avalanche 2500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Avalanche 2500 Idler Arm includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Avalanche 2500 Idler Arm Parts and Q&A

Pitman Arm
12471379
Q: How to replace the idler arm on Chevrolet Avalanche 2500?
A:
To change the idle arm, you will need the following tools Universal Steering Linkage Puller (J24319-B), Steering Linkage Installer (12 mm) (J29193), and Steering Linkage Installer (14 mm) (J29194). Start by lifting the car and take off the engine protection shield if applicable. Next, unscrew the idler arm ball stud nut but avoid reusing it and then unplug the idler arm off the relay rod using Universal Steering Linkage Puller (&24319-B). Go ahead and remove the idler arm frame bolts and nuts and then the idler arm from the vehicle. For installation place the new idler arm on the frame, then put the frame bolts and nuts and tighten the bolts to 99 Nm (73 ft. lbs.). Connect relay rod to idler arm ball stud, seal should be on the stud, use Steering Linkage Installer (12mm) J29193 or Steering Linkage Installer (14mm) J29194 to seat the tapers, tighten to 54Nm(40ft lbs). Assemble a new idler arm ball stud prevailing torque nut to the idler arm ball stud and provide a torque of 62 Nm (46 ft. lbs.). Finally, if equipped, reinstall the engine protection shield, resituate the vehicle, and perform a wheel alignment check.