How to replace the Release Hood Cable on Chevrolet Camaro?

The initial step to replace a Hood Cable requires tools like small flat-blades to insert into the latch clip located on the primary latch to detach the cable. The cable grommet from the primary latch needs to be prised out before pulling the hood cable through the radiator support hole. Pull the body hinge pillar trim panel from the driver side before undoing hood cable screws as well as removing the hood cable handle. Use a small flat-bladed tool to detach the cowl grommet and document the hood cable route before pulling the cable out. The proper routing of the hood cable starts with installation into the cowl which should be followed by insertion of the cowl grommet. Install the hood cable handle and the hood primary latch cable screws by tightening them to 7 N.m (62 lb in). The body hinge pillar trim panel requires replacement on the driver side while the hood cable must connect to the primary latch by securing it onto the cable clip then passing it through the radiator support hole before inserting the end into the latch clip while attaching the cable grommet.

OEM Chevrolet Camaro Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Hood Cables found

View related parts
Chevrolet Camaro Release Cable Part Number: 23320281
$39.05 MSRP: $58.13
You Save: $19.08 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Replaced by: 86508766
- Replaces: 23155751
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Release Cable Part Number: 20959350
$31.01 MSRP: $46.16
You Save: $15.15 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Package, Hood Latch; Hood Release Cable
- Replaces: 92233983, 92232162, 92243196
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Release Cable Part Number: 10250435
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Release Cable Part Number: 10182100
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, Sport, Z28 | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Release Cable Part Number: 92234816
Product Specifications
- Other Name: Cable Package, Hood Latch; Hood Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Release Cable Part Number: 10189314
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1992 Chevrolet Camaro | Iroc-Z, RS, RS Heritage Edition, Z28, Z28 Heritage Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

Chevrolet Camaro Hood Cable

Want to cut long-term maintenance and repair costs? Choose OEM Hood Cable. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro Hood Cable includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Hood Cable available in Chevrolet Camaro along with using it as a mechanism to open the automobile hood for easy access to the engine while at the same time avoiding exposure to harsh weather conditions. This cable works by using the hood latch to engage the release mechanism to enable one open the hood as a push of a button. These Hood Cables are subject to wear and tear that can be in the form of breakages, cracks, and rusting thus causing some arduous time to operate the hood. While different generations of the Chevrolet Camaro may have different Hood Cable designs, the general use of the cable is always the same. If these cables are damaged, the correct operation of the hood and access to the engine will require replacement of these cables with high-quality analogs. There could always be situations, especially during calamities, that one would wish to release his or her hood but cannot do so because the Hood Cable was not well checked on.

Chevrolet Camaro Hood Cable Parts and Q&A

Release Cable
10250435
Q: How to replace the Release Hood Cable on Chevrolet Camaro?
A:
The initial step to replace a Hood Cable requires tools like small flat-blades to insert into the latch clip located on the primary latch to detach the cable. The cable grommet from the primary latch needs to be prised out before pulling the hood cable through the radiator support hole. Pull the body hinge pillar trim panel from the driver side before undoing hood cable screws as well as removing the hood cable handle. Use a small flat-bladed tool to detach the cowl grommet and document the hood cable route before pulling the cable out. The proper routing of the hood cable starts with installation into the cowl which should be followed by insertion of the cowl grommet. Install the hood cable handle and the hood primary latch cable screws by tightening them to 7 N.m (62 lb in). The body hinge pillar trim panel requires replacement on the driver side while the hood cable must connect to the primary latch by securing it onto the cable clip then passing it through the radiator support hole before inserting the end into the latch clip while attaching the cable grommet.