What Tools Are Required to Service and Repair Front Coil Springs and Shock Absorber on Chevrolet Impala?

You need these tools to work on and fix the suspension strut: you will need the holding fixture (J 3289-20), strut compressor (J 34013-B), damper rod clamp (J 34013-20), alignment rod (J 34013-197), strut rod nut socket (J 42991), strut compressor lower adapter (J 34013-971), and strut compressor upper adapter (J-34013-972). First, take the strut off the vehicle, and fit it into the strut compressor (J 34013-B) with the strut compressor lower adapter (J 34013-971), strut compressor upper adapter (J-34013-972), and holding fixture (J 3289-20). Twist the compressor forcing screw to squeeze the spring a little. Have a 45 torx socket on the strut shaft to keep it in place, then use the strut rod nut socket (J 42991) to take out the mount nut. Use the alignment rod (J 34013-197) to slide the strut shaft out of the upper mount, then loosen the compressor screw so you can take the strut and spring out. Make sure you put the strut mount on right, then assemble it in the strut compressor using the adapters and strap the strut compressor (J 34013-20) onto the strut shaft. Put the spring on the strut, align it properly, and fit the upper locking pin. Hold the alignment rod (J 34013-197) against the strut shaft and turn the compressor screw clockwise until you can see the threads. After putting on the washer and nut, remove the strut compressor (J 34013-20) from the strut shaft and use the strut rod nut socket (J 42991) to tighten the strut mount nut to 85 nm (63 ft. Lbs.) while you keep the strut shaft steady with a 45 torx socket. After that, take the strut out of the strut compressor and place it onto the vehicle.

How to service and repair the rear coil springs and suspension strut on Chevrolet Impala?

A technician must remove the vehicle's strut and coil spring before servicing or repairing the rear suspension strut. Put the strut inside the strut spring compressor while also making sure the spring stays compressed during strut movement. Turn the spring compressor forcing screw while compressing the coil spring. Apply a 45 torx(R) socket to restrain the strut shaft before removing the upper strut mount nut through the strut rod nut socket (J 42991). Take the strut out of the strut spring compressor device (J 45400). You can remove the upper strut mount and coil spring by loosening the forcing screw on the compressor. To assemble the strut spring compressor (J 45400) position the coil spring and upper strut mount then turn the spring compressor forcing screw until the coil spring reaches the desired compression rate. Check fastener safety protocol while you install the strut assembly onto the coil spring with the upper strut mount. Use the strut rod nut socket (J 42991) and a 45 torx(R) socket to tighten the mount nut to 75 nm (55 lb ft). To complete installation simply remove the strut from the strut spring compressor (J 45400) before reinstalling it to the vehicle.

OEM Chevrolet Impala Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

32 Coil Springs found

View related parts
Chevrolet Impala Coil Spring, Front Part Number: 22133025
$88.81 MSRP: $157.87
You Save: $69.06 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2011 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Spring, Rear Passenger Side Part Number: 10391596
$45.45 MSRP: $81.17
You Save: $35.72 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring Assembly-Rear (Right-Hand Proc); Coil Spring Set; Coil Springs; Spring, Rear Spring
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Coil Spring, Front Part Number: 20901079
$124.31 MSRP: $222.98
You Save: $98.67 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Impala | LS, LT, LTZ | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Chevrolet Impala Coil Spring, Rear Driver Side Part Number: 22781671
Product Specifications
- Other Name: Spring Assembly-Rear (Left-Hand Proc); Coil Springs; Spring; Spring, Rear Spring
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Impala | LS, LT, LTZ | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Coil Spring, Rear Driver Side Part Number: 22781672
Product Specifications
- Other Name: Spring Assembly-Rear (Left-Hand Proc); Coil Springs; Spring; Spring, Rear Spring
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Impala | Police | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Coil Spring, Front Part Number: 15782420
Product Specifications
- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Replaces: 22133024
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2011 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Coil Spring, Rear Part Number: 485714
Product Specifications
- Other Name: Spring-Rear; Coil Springs; Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Coil Spring, Rear Part Number: 22076517
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Coil Spring, Front Part Number: 22229681
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Coil Spring, Front Part Number: 22954486
Product Specifications
- Other Name: Spring-Front Coil; Coil Springs; Spring; Spring, Front Chassis
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014 Chevrolet Impala | Eco | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Chevrolet Impala Coil Spring, Front Part Number: 22229680
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Coil Spring, Rear Passenger Side Part Number: 10415624
Product Specifications
- Other Name: Spring Assembly-Rear (Right-Hand Proc); Coil Spring Set; Coil Springs; Spring; Spring, Rear Spring
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Impala | LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Coil Spring, Front Part Number: 22133028
Product Specifications
- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Impala | LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Spring, Front Part Number: 22178446
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Coil Spring, Front Part Number: 22133023
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2011 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Coil Spring, Front Part Number: 22076512
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 00378539, 378539
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Spring, Front Part Number: 22076505
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996, 1984-1985 Chevrolet Impala | Base, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Coil Spring Part Number: 14087321
Product Specifications
- Other Name: Spring; Coil Springs; Spring, Front Chassis
- Replaces: 22076514, 22076515
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Coil Spring, Front Part Number: 22077450
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring, Rear Spring
- Position: Front
- Replaces: 22076510
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Leaf Spring Part Number: 1631142
Product Specifications
- Other Name: Spring Assembly; Coil Springs; Coil Spring; Spring; Spring, Rear Spring
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS

| Page 1 of 2 |Next >

1-20 of 32 Results

Chevrolet Impala Coil Springs

Want to cut long-term maintenance and repair costs? Choose OEM Coil Springs. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Coil Springs includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Coil Springs are belonging to the suspension system of the car; in particular, Chevrolet Impala model, that provide the car stability on the road and smooth its movement over the irregularities of the surface. Most springs are of steel and these store mechanical energy and which are in compressed form in the vehicle provide a relenting ride. Every wheel of the Impala has a coil spring fitted and such part is very essential in achieving comfort as well as performance. In the course of producing the Impala, different kinds of coil springs have been employed, with strong emphasis on the spring types that oppose compressive forces; the compression springs. The springs' performance depends on their physical characteristics, in particular the shear modulus and Young's modulus, that defines the springs' behavior when in use. Coil springs are more common but, similarly, to other components, they degrade over time and, thus, cause a car to sag and provide poor suspension.

Chevrolet Impala Coil Springs Parts and Q&A

Coil Spring, Front
15782420
Q: What Tools Are Required to Service and Repair Front Coil Springs and Shock Absorber on Chevrolet Impala?
A:
You need these tools to work on and fix the suspension strut: you will need the holding fixture (J 3289-20), strut compressor (J 34013-B), damper rod clamp (J 34013-20), alignment rod (J 34013-197), strut rod nut socket (J 42991), strut compressor lower adapter (J 34013-971), and strut compressor upper adapter (J-34013-972). First, take the strut off the vehicle, and fit it into the strut compressor (J 34013-B) with the strut compressor lower adapter (J 34013-971), strut compressor upper adapter (J-34013-972), and holding fixture (J 3289-20). Twist the compressor forcing screw to squeeze the spring a little. Have a 45 torx socket on the strut shaft to keep it in place, then use the strut rod nut socket (J 42991) to take out the mount nut. Use the alignment rod (J 34013-197) to slide the strut shaft out of the upper mount, then loosen the compressor screw so you can take the strut and spring out. Make sure you put the strut mount on right, then assemble it in the strut compressor using the adapters and strap the strut compressor (J 34013-20) onto the strut shaft. Put the spring on the strut, align it properly, and fit the upper locking pin. Hold the alignment rod (J 34013-197) against the strut shaft and turn the compressor screw clockwise until you can see the threads. After putting on the washer and nut, remove the strut compressor (J 34013-20) from the strut shaft and use the strut rod nut socket (J 42991) to tighten the strut mount nut to 85 nm (63 ft. Lbs.) while you keep the strut shaft steady with a 45 torx socket. After that, take the strut out of the strut compressor and place it onto the vehicle.
Coil Spring, Rear Passenger Side
10391594
Q: How to service and repair the rear coil springs and suspension strut on Chevrolet Impala?
A:
A technician must remove the vehicle's strut and coil spring before servicing or repairing the rear suspension strut. Put the strut inside the strut spring compressor while also making sure the spring stays compressed during strut movement. Turn the spring compressor forcing screw while compressing the coil spring. Apply a 45 torx(R) socket to restrain the strut shaft before removing the upper strut mount nut through the strut rod nut socket (J 42991). Take the strut out of the strut spring compressor device (J 45400). You can remove the upper strut mount and coil spring by loosening the forcing screw on the compressor. To assemble the strut spring compressor (J 45400) position the coil spring and upper strut mount then turn the spring compressor forcing screw until the coil spring reaches the desired compression rate. Check fastener safety protocol while you install the strut assembly onto the coil spring with the upper strut mount. Use the strut rod nut socket (J 42991) and a 45 torx(R) socket to tighten the mount nut to 75 nm (55 lb ft). To complete installation simply remove the strut from the strut spring compressor (J 45400) before reinstalling it to the vehicle.