How to service and repair the Crankshaft Position Sensor on Chevrolet Malibu?

To address service and repair the Crankshaft Position Sensor operation starts in a way that install a scan tool and look for dtc making sure you track that when any dtc other than p1336 exists please check the list of dtc for more details. Choose the crankshaft position (CKP) variation learn procedure with the help of the scan tool and note the fuel cut-off for the engine under consideration. Follow the scan tool's instructions: bar the drive wheels, set the parking brake on the vehicle, rotate the ignition from off to on, manually fix the Brake Pedal, operate and idle the engine, switch off the a/c system, and engage the park mode of the automatic or neutral in the manual variety. The scan tool will monitor the activities of ckp sensor, cmp sensor, and engine coolant temperature (ECT). If the ect is not warm enough, idle the engine until it gets the right temperature level. Turn on the ckp system variation learn procedure on the scan tool and modulate the throttle as soon as the engine begins to decelerate in the process of learning, enabling the engine control to be returned to the operator. Slowly bring the engine speed up to the noticed rpm and fully open the throttle when the fuel is cut off. Learn status will display on the scan. Learned this ignition." if this message does not flash and no other dtcs are stored, inspect for engine symptoms;. If there is a dtc, use the dtc list for details. Finally, after a successful completion of the learn procedure, turn off the ignition for 30 seconds.

How to replace the Crankshaft Position Sensor (24X) on Chevrolet Malibu?

To replace the crankshaft position (CKP) sensor (24X), turn off ignition and raise the vehicle with a hoist first. Index the crankshaft Harmonic Balancer and make a note of the sensor harness routing before the removal. Next, note that you need to remove the harness retaining clip with bolt, disconnect the sensor electrical connector, and remove the sensor bolts in order to remove the sensor. For installation, mount the 24x Crankshaft Position Sensor with the bolts and harness as mentioned in removal. Mount the harness retaining clip with bolt and tighten the ckp sensor bolts to 10 n.m (89 lb in). Connect the sensor ei connector, reinstall the balancer on the crankshaft, lower the vehicle, ckp system variation learn procedure.

OEM Chevrolet Malibu Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Crankshaft Position Sensors found

View related parts
Chevrolet Malibu Crankshaft Position Sensor, Green Line Part Number: 12588992
$33.33 MSRP: $62.60
You Save: $29.27 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaced by: 12674703
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Chevrolet Malibu | Classic LS, Eco, Hybrid, LS, LT, LTZ | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Chevrolet Malibu Crankshaft Position Sensor Part Number: 10456555
$36.47 MSRP: $74.07
You Save: $37.60 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 10456043
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Crankshaft Position Sensor Part Number: 12674702
$44.84 MSRP: $91.06
You Save: $46.22 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Camshaft Position Sensor; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12627185, 12632872
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2022 Chevrolet Malibu | LS, LT, LTZ, Premier | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Crankshaft Position Sensor Part Number: 12615626
$17.35 MSRP: $32.60
You Save: $15.25 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2012 Chevrolet Malibu | LT, LTZ | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Malibu Crankshaft Position Sensor Part Number: 12613030
$36.50 MSRP: $68.55
You Save: $32.05 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12590991
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Malibu | LT, LTZ | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Malibu Crankshaft Position Sensor Part Number: 12567712
$44.56 MSRP: $90.52
You Save: $45.96 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 1103703, 10456295, 24576398
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006, 1997-1999 Chevrolet Malibu | Base, LS, LT | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Malibu Crankshaft Position Sensor Part Number: 12567648
$97.21 MSRP: $197.43
You Save: $100.22 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 24508212, 10231684, 12550965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Crankshaft Position Sensor Part Number: 25203317
$13.67 MSRP: $25.68
You Save: $12.01 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaced by: 25207127
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Malibu | L, LS, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Malibu Crankshaft Position Sensor Part Number: 12598208
$24.51 MSRP: $46.02
You Save: $21.51 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Camshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Replaces: 12591007
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chevrolet Malibu | Classic LS, Classic LT, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Crankshaft Position Sensor Part Number: 55492970
$31.23 MSRP: $58.64
You Save: $27.41 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2019 Chevrolet Malibu | Hybrid | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Malibu Crankshaft Position Sensor Part Number: 12574323
$40.82 MSRP: $82.89
You Save: $42.07 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chevrolet Malibu | LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

Chevrolet Malibu Crankshaft Position Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Crankshaft Position Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Malibu parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Malibu Crankshaft Position Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Crankshaft Position Sensor in Chevrolet Malibu cars is definitely an essential electronic control gadget utilized to measure the place of the crankshaft shrewd in addition to its rate of rotation. This sensor sends information to the powertrain control module so that there can be better control of ignition time and the injections of fuel for the engine's efficiency. Chevrolet Malibu has applied Crankshaft Position Sensors of inductive, Hall Effect, magnetoresistive, and optical types in the course of years. Inductive sensors are non-active whereas Hall and magnetoresistive sensors are capable of detecting static magnetic fields only. Optical sensors deliver high edge accuracy but contain fouling degradation factors. The primary function of Crankshaft Position Sensor is to optimize the administration of the engine and if there is anything that goes wrong in this component, then problems such as poor starting and issues in the performance of the engine are bound to occur.

Chevrolet Malibu Crankshaft Position Sensor Parts and Q&A

Crankshaft Position Sensor
12567648
Q: How to service and repair the Crankshaft Position Sensor on Chevrolet Malibu?
A:
To address service and repair the Crankshaft Position Sensor operation starts in a way that install a scan tool and look for dtc making sure you track that when any dtc other than p1336 exists please check the list of dtc for more details. Choose the crankshaft position (CKP) variation learn procedure with the help of the scan tool and note the fuel cut-off for the engine under consideration. Follow the scan tool's instructions: bar the drive wheels, set the parking brake on the vehicle, rotate the ignition from off to on, manually fix the Brake Pedal, operate and idle the engine, switch off the a/c system, and engage the park mode of the automatic or neutral in the manual variety. The scan tool will monitor the activities of ckp sensor, cmp sensor, and engine coolant temperature (ECT). If the ect is not warm enough, idle the engine until it gets the right temperature level. Turn on the ckp system variation learn procedure on the scan tool and modulate the throttle as soon as the engine begins to decelerate in the process of learning, enabling the engine control to be returned to the operator. Slowly bring the engine speed up to the noticed rpm and fully open the throttle when the fuel is cut off. Learn status will display on the scan. Learned this ignition." if this message does not flash and no other dtcs are stored, inspect for engine symptoms;. If there is a dtc, use the dtc list for details. Finally, after a successful completion of the learn procedure, turn off the ignition for 30 seconds.
Crankshaft Position Sensor
10456555
Q: How to replace the Crankshaft Position Sensor (24X) on Chevrolet Malibu?
A:
To replace the crankshaft position (CKP) sensor (24X), turn off ignition and raise the vehicle with a hoist first. Index the crankshaft Harmonic Balancer and make a note of the sensor harness routing before the removal. Next, note that you need to remove the harness retaining clip with bolt, disconnect the sensor electrical connector, and remove the sensor bolts in order to remove the sensor. For installation, mount the 24x Crankshaft Position Sensor with the bolts and harness as mentioned in removal. Mount the harness retaining clip with bolt and tighten the ckp sensor bolts to 10 n.m (89 lb in). Connect the sensor ei connector, reinstall the balancer on the crankshaft, lower the vehicle, ckp system variation learn procedure.