How to replace the rear wheel bearing/hub on Chevrolet Monte Carlo?

Lift and stabilize the vehicle after that detach both wheels including tires before taking off the brake rotor. Transform the abs electrical connector and untether the park brake cable from the park brake actuator when replacing parts. Afterward detach the Wheel Bearing/hub and park brake assembly from the knuckle through its mounting bolts while moving along with the park brake actuator that you will remove from the rear Wheel Bearing/hub next. You should connect the park brake actuator to the rear Wheel Bearing/hub first and then position the Wheel Bearing/hub and park brake set onto the knuckle. Secure the Wheel Bearing/hub-to-knuckle bolts by tightening them to 75 nm (55 ft. Lbs.). Fold the park brake cable back into place and join it with the park brake actuator. Also join the abs electrical connector with the Wheel Speed Sensor if present. Put back the brakes rotor and wheels with tires after lowering the vehicle.

How to replace the front wheel bearing and hub on Chevrolet Monte Carlo?

Start by lifting the vehicle then putting blocks under it to work with the front Wheel Bearing and hub. First disconnect the Wheel Speed Sensor electrical connector when present before taking off the tire wheel and Wheel Speed Sensor bracket. Put a nut wrench on the drive shaft nut while aligning a flat tool through the caliper and rotor to stop them from rotating. Use three wheel nuts to attach j 42129 wheel hub remover (J 42129) on top of the Wheel Bearing/hub part. Apply the j 42129 to push out the wheel drive shaft from the Wheel Bearing/hub before eliminating and discarding Wheel Bearing/hub bolts while protecting the wheel drive shaft outer seal/boot. Take out the Wheel Bearing/hub assembly with the splash shield. Note its original position to set up the shield properly during reinstallation. You should put the new Wheel Bearing/hub together with its splash shield exactly where you noted it during disassembly and fasten it using new hardware to keep your vehicle safe. Secure both new Wheel Bearing/hub bolts with 130 nm torque (96 ft. Lbs.). Install the brake rotor and caliper afterward. Stand the rotor still while fitting the front wheel drive shaft nut using either a drift or flat tool. Secure it to 160 nm (118 ft. Lbs.). After ensuring the connector clip sits correctly on the bracket, install the Wheel Speed Sensor electrical connection on the bracket where present. Next, if necessary, connect the Wheel Speed Sensor electrical connector to its location. Place the tire and wheel on the vehicle when all components are ready to drive down.

OEM Chevrolet Monte Carlo Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Wheel Bearings found

View related parts
Chevrolet Monte Carlo Hub & Bearing, Rear Part Number: 13585741
$168.64 MSRP: $327.30
You Save: $158.66 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Rear Wheel; Wheel Bearing; Axle Bearing; Wheel Hub; Hub & Bearing Assembly; Hub, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Front Hub & Bearing Part Number: 88964096
$134.06 MSRP: $250.16
You Save: $116.10 (47%)
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel; Wheel Bearing & Hub Repair Kit; Axle Bearing.; Hub & Bearing; Hub; Hub, Front Wheel
- Position: Front
- Replaces: 89047803, 12413005, 12413097
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Wheel Bearing, Rear Part Number: 12471606
$7.42 MSRP: $14.39
You Save: $6.97 (49%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Wheel; Axle Bearing; Shaft Bearings; Bearing Assembly; Housing Bearing; Axle Shaft Bearing; Transmission Countershaft Gear Bearing.
- Position: Rear
- Replaces: 09428573, 07451785, 9428573, 7451785
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Wheel Bearing, Front Part Number: 457196
$23.04 MSRP: $43.24
You Save: $20.20 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Wheel Brace; Axle Bearing; Wheel Bearings; Front Inner Bearing; Transmission Countershaft Gear Bearing; Front Wheel Inner Bearing.
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Wheel Bearing, Front Outer Part Number: 14066918
$11.29 MSRP: $20.16
You Save: $8.87 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Wheel Outer; Axle Bearing; Front Wheel Bearing; Front Bearing; Outer Bearing; Bearing
- Position: Front Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Axle Bearings, Rear Part Number: 7451785
$7.42 MSRP: $14.39
You Save: $6.97 (49%)
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Rear Wheel R5; Wheel Bearing; Axle Bearing; Shaft Bearings; Bearing, Transmission Counter Gear; Bearing, Rear Axle U Joint; Bearing, Countershaft
- Position: Rear
- Replaced by: 12471606
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Hub & Bearing, Rear Part Number: 7470609
$199.35 MSRP: $368.81
You Save: $169.46 (46%)
ADD TO CART
Product Specifications
- Other Name: Hub Assembly Rear Wheel (W/ Bearing & Sensor); Wheel Bearing & Hub Assembly; Axle Bearing; Wheel Hub; Hub & Bearing Assembly; Hub; Hub, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Hub Assembly, Front Part Number: 84641365
$223.57 MSRP: $433.94
You Save: $210.37 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Front Hub & Bearing; Front Wheel Hub Kit; Rear Wheel Hub
- Position: Front
- Replaced by: 19433930
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Hub Assembly, Front Part Number: 12429204
$223.57 MSRP: $433.94
You Save: $210.37 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Kit, Front Wheel; Wheel Bearing & Hub Assembly; Disc Brake Hardware Kit; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing; Front Hub; Hub & Bearing; Hub Kit, Rear Wheel
- Position: Front
- Replaced by: 19433930
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Chevrolet Monte Carlo | LS, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Hub & Bearing, Rear Part Number: 12413091
$96.99 MSRP: $175.54
You Save: $78.55 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub
- Position: Rear
- Replaces: 07470611, 7470611
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Hub & Bearing, Rear Part Number: 19122338
Product Specifications
- Other Name: Hub Assembly, Rear Wheel; Wheel Bearing & Hub; Axle Bearing; Wheel Hub; Hub & Bearing Assembly; Hub, Rear Wheel
- Position: Rear
- Replaces: 12413099
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Hub Assembly, Front Part Number: 7470625
Product Specifications
- Other Name: Hub F; Wheel Bearing and Hub Assembly; Disc Brake Hardware Kit; Wheel Hub Repair Kit; Axle Bearing.; Hub & Bearing; Bearing, Front Wheel Drive Axle Shaft; Hub, Front Wheel
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Hub & Bearing, Rear Part Number: 7470545
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub; Hub
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Hub & Bearing, Rear Part Number: 12413029
Product Specifications
- Other Name: Hub Assembly, Rear Wheel; Wheel Bearing & Hub; Axle Bearing; Wheel Hub; Hub, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Monte Carlo | LS, LT, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Monte Carlo Wheel Bearing

Want to cut long-term maintenance and repair costs? Choose OEM Wheel Bearing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Wheel Bearing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Monte Carlo Wheel Bearing is one of the great parts that plays a great role to increase the reliability and performance of Chevrolet Monte Carlo car and safe driving. These wheel bearings are fitted inside the wheel hubs to reduce friction to facilitate efficiency in operations of the wheel and tire assembly which is very key in the performance and safety of any vehicle. As for the more specific details of the application, different Chevrolet Monte Carlo models have relied on the varied hub and bearing patterns, and the most common of them is the integral hub and bearing assembly which may include the ABS sensor. Besides, it also makes the equipment easy to maintain while guaranteeing its efficiency. Chevrolet Monte Carlo Wheel Bearing should be checked and maintained often because Bad bearings cause noise, vibration and can actually lead to detachment in the wheel which is dangerous. This American car has been in production for almost 4 decades starting from 1969 up to 2007; the Monte Carlo boasted of luxury coupled with astonishing sports-like performance as v6 and v8 engines marked some generations of this car. It therefore goes without saying that wheel bearings have a very big contribution in increasing efficiency of these engines and the drive dynamics of the Monte Carlo. Some of the unique selling points include the plenary use of certified high-carbon steel for all main components and easy replacement and inspection of such features as the tapered roller bearings in non-driven axles in the Chevrolet Monte Carlo Wheel Bearing. Lastly, there is nothing more important than the Chevrolet Monte Carlo Wheel Bearing while rising through the car industry that this legendary coupe should be preserved to represent the power and high-quality cars.

Chevrolet Monte Carlo Wheel Bearing Parts and Q&A

Hub & Bearing, Rear
12413091
Q: How to replace the rear wheel bearing/hub on Chevrolet Monte Carlo?
A:
Lift and stabilize the vehicle after that detach both wheels including tires before taking off the brake rotor. Transform the abs electrical connector and untether the park brake cable from the park brake actuator when replacing parts. Afterward detach the Wheel Bearing/hub and park brake assembly from the knuckle through its mounting bolts while moving along with the park brake actuator that you will remove from the rear Wheel Bearing/hub next. You should connect the park brake actuator to the rear Wheel Bearing/hub first and then position the Wheel Bearing/hub and park brake set onto the knuckle. Secure the Wheel Bearing/hub-to-knuckle bolts by tightening them to 75 nm (55 ft. Lbs.). Fold the park brake cable back into place and join it with the park brake actuator. Also join the abs electrical connector with the Wheel Speed Sensor if present. Put back the brakes rotor and wheels with tires after lowering the vehicle.
Hub Assembly, Front
84641365
Q: How to replace the front wheel bearing and hub on Chevrolet Monte Carlo?
A:
Start by lifting the vehicle then putting blocks under it to work with the front Wheel Bearing and hub. First disconnect the Wheel Speed Sensor electrical connector when present before taking off the tire wheel and Wheel Speed Sensor bracket. Put a nut wrench on the drive shaft nut while aligning a flat tool through the caliper and rotor to stop them from rotating. Use three wheel nuts to attach j 42129 wheel hub remover (J 42129) on top of the Wheel Bearing/hub part. Apply the j 42129 to push out the wheel drive shaft from the Wheel Bearing/hub before eliminating and discarding Wheel Bearing/hub bolts while protecting the wheel drive shaft outer seal/boot. Take out the Wheel Bearing/hub assembly with the splash shield. Note its original position to set up the shield properly during reinstallation. You should put the new Wheel Bearing/hub together with its splash shield exactly where you noted it during disassembly and fasten it using new hardware to keep your vehicle safe. Secure both new Wheel Bearing/hub bolts with 130 nm torque (96 ft. Lbs.). Install the brake rotor and caliper afterward. Stand the rotor still while fitting the front wheel drive shaft nut using either a drift or flat tool. Secure it to 160 nm (118 ft. Lbs.). After ensuring the connector clip sits correctly on the bracket, install the Wheel Speed Sensor electrical connection on the bracket where present. Next, if necessary, connect the Wheel Speed Sensor electrical connector to its location. Place the tire and wheel on the vehicle when all components are ready to drive down.