How to Properly Disconnect and Connect a Battery Cable on Chevrolet Tahoe?

Start the Battery Cable disconnect process by first turning all vehicle accessories off followed by engine shut-off and then opening the hood. Start by loosening the negative cable nut then take out the negative Battery Cable from the battery terminal while keeping the cable safely distant from the battery. Clear all corroded material from the battery terminal and Battery Cable end before you connect the negative Battery Cable to its position on the battery. Put on the negative Battery Cable to its terminal while tightening the cable nut to 5 nm (44 lb in) then shut the hood.

How to replace the positive battery cable on Chevrolet Tahoe?

The procedure for replacing the positive Battery Cable consists of first disconnecting the negative Battery Cable followed by unsnapping the positive Battery Cable cap and then disconnecting the positive cable while understanding the integral nature of the bolt to the Battery Cable. At the underhood bussed electrical center (UBEC) users should slowly rotate the positive cable bolt then remove the engine sight shield when necessary. The first step is to remove the positive Battery Cable from the junction block by unsnap the junction block cover while also pulling away the positive Battery Cable from the block. Vehicle owners can replace the negative cable clip with the positive cable clip on constructions with 4.8 l, 5.3 l, or 6.0 l engine types before supporting and lifting the vehicle. When the vehicle has an 8.1 l engine you should remove the negative cable clip from the positive cable clip after raising the vehicle a second time. After removing the Battery Cable channel bolt you should slide out its pin from the oil pan tab and extract the cable from the channel. The Power Steering Pump requires removal of the Battery Cable bracket bolt along with its bracket before continuing to the starter lead nut and then extracting the positive cable from the starter. The technician should disconnect the positive cable clip from the oil pan while also removing the positive Battery Cable from the system. Follow these steps to remove the positive cable from the starter for both the 8.1 l and the other engine models: begin by removing the starter lead nut from the 8.1 l engine then the positive cable from the starter, and finally take out the positive cable clip nut and cable from the engine harness clip. Gaining access to the 8.1 l engine engine harness clip involves attaching the positive Battery Cable then securing it to the harness clip. Begin by installing the 8 n.m (71 lb in) tightened positive cable clip nut before connecting the positive cable to the starter while installing and tightening the starter lead nut to 9 n.m (80 lb in). The installation of the positive Battery Cable requires installation to the oil pan clip followed by attachment to the oil pan and assembly of the positive cable clip to its location. After connecting the positive cable to the starter, tightly install the starter lead nut to 9 n.m (80 lb in). The bracket with bolt requires installation and tightening at 25 n.m (18 lb ft). The positive Battery Cable installation requires you to position the cable in the channel before inserting its pin into the oil pan tab followed by torquing the positive cable channel bolt to 12 n.m (106 lb in). During the procedure of combining negative and positive cable clips, lower the vehicle then follow the sequence of applying negative cable clips for 8.1 l engine units as well as for 4.8 l, 5.3 l, and 6.0 l engines. After inserting the positive cable into the junction block users should close the junction block cover. Reposition the engine sight shield when ready and secure the positive cable bolt on the ubec with 9 n.m (80 lb in), then attach the positive Battery Cable before securing the bolt to 17 n.m (13 lb ft). The last step involves both closing the positive Battery Cable cap while reattaching the negative Battery Cable.

OEM Chevrolet Tahoe Battery Cable

Car Battery Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

51 Battery Cables found

View related parts
Chevrolet Tahoe Battery Cable Part Number: 20771932
$25.04 MSRP: $46.70
You Save: $21.66 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Generator Battery Jumper; Battery Cables; Cable, Battery(Positive)
- Replaces: 25814778, 15252181, 25922061
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chevrolet Tahoe | LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Negative Cable Part Number: 84430007
$44.68 MSRP: $83.90
You Save: $39.22 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Battery Negative; Battery Cables; Ground Strap; Cable, Battery Negative And Engine Ground
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Chevrolet Tahoe | High Country, LS, LT, Premier, RST | 6 Cyl 3.0 L DIESEL
View related parts
Chevrolet Tahoe Battery Cable Part Number: 84888687
$84.10 MSRP: $150.18
You Save: $66.08 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Starter Solenoid; Positive Cable; Cable; Cable, Battery(Positive)
- Replaces: 84430006, 84733772
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Chevrolet Tahoe | High Country, LS, LT, Premier, RST | 6 Cyl 3.0 L DIESEL
View related parts
Chevrolet Tahoe Battery Cable Part Number: 84966318
$58.34 MSRP: $116.92
You Save: $58.58 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Auxiliary Battery Negative; Battery Cables; Cable, Battery Negative And Engine Ground
- Replaces: 84270356
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Chevrolet Tahoe | Commercial, High Country, LS, LT, PPV, Premier, RST, SSV, Z71 | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Battery Cable Part Number: 85150977
$125.78 MSRP: $225.62
You Save: $99.84 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Starter Solenoid; Battery Cables; Positive Cable
- Replaced by: 85760275
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Chevrolet Tahoe | Commercial, High Country, LS, LT, PPV, Premier, RST, SSV, Z71 | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Ground Cable Part Number: 23219941
$14.84 MSRP: $26.86
You Save: $12.02 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strap Assembly-Battery Negative; Ground Strap
- Replaced by: 19434467
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2012 Chevrolet Tahoe | LS, LT, LTZ | 8 Cyl 5.3 L FLEX
View related parts
Chevrolet Tahoe Ground Cable Part Number: 20776810
$14.00 MSRP: $26.30
You Save: $12.30 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strap Assembly-Engine Ground; Ground Strap
- Replaced by: 19434466
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chevrolet Tahoe | LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Battery Cable Part Number: 84906890
$88.12 MSRP: $138.01
You Save: $49.89 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Generator Battery Jumper; Battery Cables; Positive Cable; Cable, Battery(Positive)
- Replaced by: 85012025
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Chevrolet Tahoe | High Country, LS, LT, Premier, RST | 6 Cyl 3.0 L DIESEL
View related parts
Chevrolet Tahoe Positive Cable Part Number: 12157313
Product Specifications
- Other Name: Cable Assembly, Battery Positive (42"Long); Battery Cables; Cable, Battery(Positive)
- Replaces: 12167776, 12060097
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Tahoe Negative Cable Part Number: 15321221
Product Specifications
- Other Name: Cable, Battery Negative; Battery Cables; Ground Strap; Cable, Battery Negative And Engine Ground
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 Chevrolet Tahoe | Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Tahoe Positive Cable Part Number: 12157093
Product Specifications
- Other Name: Cable, Battery (Positive); Battery Cables; Cable, Battery(Positive)
- Replaces: 12150235, 12176068
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chevrolet Tahoe | Base, Limited, LS, LT, Z71 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Tahoe Negative Cable Part Number: 22846471
$71.71 MSRP: $128.06
You Save: $56.35 (44%)
Product Specifications
- Other Name: Cable Assembly-Battery Negative; Battery Cables; Ground Strap; Cable, Battery Negative And Engine Ground
- Replaces: 15826905, 25897054, 20835005, 20967455, 25848475
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Chevrolet Tahoe | LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Positive Cable Part Number: 15372005
Product Specifications
- Other Name: Cable Assembly, Battery Positive; Battery Cables; Cable, Battery(Positive)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chevrolet Tahoe | Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Tahoe Positive Cable Part Number: 15321247
Product Specifications
- Other Name: Cable, Battery (Positive); Battery Cables; Cable, Battery(Positive)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006, 2000-2004 Chevrolet Tahoe | Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Tahoe Harness Part Number: 25870508
$117.48 MSRP: $184.85
You Save: $67.37 (37%)
Product Specifications
- Other Name: Harness, Drive Motor Battery
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2013 Chevrolet Tahoe | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Tahoe Negative Cable, Passenger Side Part Number: 12156901
Product Specifications
- Other Name: Cable, Battery Negative And Engine Ground; Battery Cables; Ground Strap
- Position: Passenger Side
- Replaces: 12150324
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Tahoe Negative Cable Part Number: 12157402
Product Specifications
- Other Name: Cable, Battery Negative And Engine Ground; Battery Cables; Ground Strap
- Replaces: 12072790
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Tahoe Negative Cable Part Number: 12157088
Product Specifications
- Other Name: Cable, Battery Negative And Engine Ground
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe Negative Cable Part Number: 15321207
Product Specifications
- Other Name: Cable, Battery Negative And Engine Ground; Battery Cables; Ground Strap
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 Chevrolet Tahoe | Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Tahoe Negative Cable, Driver Side Part Number: 12157422
Product Specifications
- Other Name: Cable Assembly, Battery Negative (22"Long); Battery Cables; Ground Strap; Cable, Battery Negative And Engine Ground
- Position: Driver Side
- Replaces: 12167880, 12054844
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 6.5 L DIESEL

| Page 1 of 3 |Next >

1-20 of 51 Results

Chevrolet Tahoe Battery Cable

Want to cut long-term maintenance and repair costs? Choose OEM Battery Cable. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Tahoe parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Tahoe Battery Cable includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Tahoe Battery Cable are important parts of the vehicle as they help in transfer of electrical current from the battery to the engine to enable starting of the engine. These cables include a power cable which supplies positive charge, and a ground cable which is the negative, to create a closed loop power system. Maintenance of these cables should be done often so as to minimize cases of oxidation and corrosion which may result in poor working and starting system failure. There has been a couple of styles of battery cables used in Tahoe models over the years with the main variation being in the quality of the materials as well as the level of protection provided. Copper core cables of top class and long lasting features are provided for replacement of any damaged part in the battery. Also, other parts such as the battery terminal extenders and protectors will go a long way in improving the working of the battery cable system. It is thus important to carry out routine visual checks in order to establish any likely defects which may affect the vehicles performance.

Chevrolet Tahoe Battery Cable Parts and Q&A

Battery Cable
20771932
Q: How to Properly Disconnect and Connect a Battery Cable on Chevrolet Tahoe?
A:
Start the Battery Cable disconnect process by first turning all vehicle accessories off followed by engine shut-off and then opening the hood. Start by loosening the negative cable nut then take out the negative Battery Cable from the battery terminal while keeping the cable safely distant from the battery. Clear all corroded material from the battery terminal and Battery Cable end before you connect the negative Battery Cable to its position on the battery. Put on the negative Battery Cable to its terminal while tightening the cable nut to 5 nm (44 lb in) then shut the hood.
Negative Cable
15321212
Q: How to replace the positive battery cable on Chevrolet Tahoe?
A:
The procedure for replacing the positive Battery Cable consists of first disconnecting the negative Battery Cable followed by unsnapping the positive Battery Cable cap and then disconnecting the positive cable while understanding the integral nature of the bolt to the Battery Cable. At the underhood bussed electrical center (UBEC) users should slowly rotate the positive cable bolt then remove the engine sight shield when necessary. The first step is to remove the positive Battery Cable from the junction block by unsnap the junction block cover while also pulling away the positive Battery Cable from the block. Vehicle owners can replace the negative cable clip with the positive cable clip on constructions with 4.8 l, 5.3 l, or 6.0 l engine types before supporting and lifting the vehicle. When the vehicle has an 8.1 l engine you should remove the negative cable clip from the positive cable clip after raising the vehicle a second time. After removing the Battery Cable channel bolt you should slide out its pin from the oil pan tab and extract the cable from the channel. The Power Steering Pump requires removal of the Battery Cable bracket bolt along with its bracket before continuing to the starter lead nut and then extracting the positive cable from the starter. The technician should disconnect the positive cable clip from the oil pan while also removing the positive Battery Cable from the system. Follow these steps to remove the positive cable from the starter for both the 8.1 l and the other engine models: begin by removing the starter lead nut from the 8.1 l engine then the positive cable from the starter, and finally take out the positive cable clip nut and cable from the engine harness clip. Gaining access to the 8.1 l engine engine harness clip involves attaching the positive Battery Cable then securing it to the harness clip. Begin by installing the 8 n.m (71 lb in) tightened positive cable clip nut before connecting the positive cable to the starter while installing and tightening the starter lead nut to 9 n.m (80 lb in). The installation of the positive Battery Cable requires installation to the oil pan clip followed by attachment to the oil pan and assembly of the positive cable clip to its location. After connecting the positive cable to the starter, tightly install the starter lead nut to 9 n.m (80 lb in). The bracket with bolt requires installation and tightening at 25 n.m (18 lb ft). The positive Battery Cable installation requires you to position the cable in the channel before inserting its pin into the oil pan tab followed by torquing the positive cable channel bolt to 12 n.m (106 lb in). During the procedure of combining negative and positive cable clips, lower the vehicle then follow the sequence of applying negative cable clips for 8.1 l engine units as well as for 4.8 l, 5.3 l, and 6.0 l engines. After inserting the positive cable into the junction block users should close the junction block cover. Reposition the engine sight shield when ready and secure the positive cable bolt on the ubec with 9 n.m (80 lb in), then attach the positive Battery Cable before securing the bolt to 17 n.m (13 lb ft). The last step involves both closing the positive Battery Cable cap while reattaching the negative Battery Cable.