How to Remove and Replace the Air Bag Clockspring Assembly on Chevrolet Trailblazer?

The air bag clock spring assembly / spiral cable replacement operation requires disabling the sir system before proceeding. Begin with a center position tilt of the Steering Column before you remove the Steering Wheel from its column. The next step requires you to eliminate both the upper and bottom trim pieces. Check the Steering Column for damage caused by accidents when possible. Pad control enabled steering wheels require the entire inflatable restraint Steering Wheel module coil and wire harness assembly to be removed at once. The coil can be removed by itself when such removal technique is approved. Use a screwdriver to eliminate the wire harness strap alongside possible wire harness assembly detachment. Steer towards the removal of the Steering Wheel module coil after using snap ring pliers on the retaining ring. The installation of the wave washer occurs when required. Insert and position the wave washer carefully along the Steering Shaft assembly block tooth at the 12 o'clock direction. Installation of new inflatable restraint Steering Wheel modules must wait until final installation because their centering tab serves as a pre-installation organizer. Users must verify that their originally used coil maintains proper positioning before further installation steps. Guide the inflatable restraint Steering Wheel module coil to face the horn tower before sliding it onto the Steering Shaft assembly. Use snap ring pliers to install the retaining ring into the race and upper shaft assembly's groove. Then discard the centering tab but ensure the whole retaining ring is seated properly. Put the retaining ring into position using snap ring pliers. Whenever a Steering Wheel has pad control functions you need to add the wire harness assembly. Set the wire harness strap in place before you install upper and lower trim covers as well as the Steering Wheel onto its column. Finally, enable the sir system.

OEM Chevrolet Trailblazer Air Bag Clockspring

Steering Wheel Airbag Coil

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Air Bag Clocksprings found

View related parts
Chevrolet Trailblazer Clockspring Part Number: 42703721
$81.01 MSRP: $120.57
You Save: $39.56 (33%)
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Steering Wheel Airbag; Air Bag Clockspring; Coil, Inflatable Restraint System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2024 Chevrolet Trailblazer | ACTIV, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Clockspring Part Number: 39206932
$192.47 MSRP: $287.76
You Save: $95.29 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Steering Wheel Airbag; Air Bag Clockspring; Coil, Inflatable Restraint System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Trailblazer | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Clockspring Part Number: 88965346
Product Specifications
- Other Name: Coil, Inflatable Restraint System; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Clockspring Part Number: 88965345
Product Specifications
- Other Name: Coil, Inflatable Restraint System; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Clockspring Part Number: 88965343
$214.31 MSRP: $320.36
You Save: $106.05 (34%)
Product Specifications
- Other Name: Coil, Inflatable Restraint System; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Trailblazer | LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Clockspring Part Number: 26090357
$182.67 MSRP: $273.05
You Save: $90.38 (34%)
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint Steering Wheel Module; Air Bag Clockspring; Coil Kit, Inflatable Restraint System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chevrolet Trailblazer | LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS

Chevrolet Trailblazer Air Bag Clockspring

Want to cut long-term maintenance and repair costs? Choose OEM Air Bag Clockspring. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Trailblazer parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Trailblazer Air Bag Clockspring includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Trailblazer Air Bag Clockspring is widely known as part of the company's Supplemental Restraint System (SRS) responsible for providing electrical connection that enables the proper working of the airbag. This linkage ensures that airbags are deployed at the right time, thus increasing the safety of passengers especially in Chevrolet Trailblazer automobiles. High-end materials are used in the production of Air Bag Clockspring, either metal combined with plastic with the help of injection molds, or metal, which ensures the clockspring is long-lasting and can perform as is expected. The Chevrolet Trailblazer has been in production since 2001 and through the years has employed several models with concerning the Air Bag Clocksprings depending on its model. Thus, the compatibility of the Chevrolet Trailblazer of different generations proves its flexibility and devotion to protection. The Air Bag Clockspring is also useful in boosting the reliability of other safety aspects of the car such as the air bag in case of an accident. Pros of the Chevrolet Trailblazer Air Bag Clockspring include the fact that it is designed to meet the new market trends in safety standards to stand out. As the design of the Chevrolet Trailblazer progresses, the need for a proper Air Bag Clockspring does not decrease, which once again emphasizes the brand values, increasing confidence in automobiles. Thus, thanks to the Chevrolet Trailblazer Air Bag Clockspring it is possible to provide the necessary quality and feeling of safety for drivers and passengers.

Chevrolet Trailblazer Air Bag Clockspring Parts and Q&A

Clockspring
88965346
Q: How to Remove and Replace the Air Bag Clockspring Assembly on Chevrolet Trailblazer?
A:
The air bag clock spring assembly / spiral cable replacement operation requires disabling the sir system before proceeding. Begin with a center position tilt of the Steering Column before you remove the Steering Wheel from its column. The next step requires you to eliminate both the upper and bottom trim pieces. Check the Steering Column for damage caused by accidents when possible. Pad control enabled steering wheels require the entire inflatable restraint Steering Wheel module coil and wire harness assembly to be removed at once. The coil can be removed by itself when such removal technique is approved. Use a screwdriver to eliminate the wire harness strap alongside possible wire harness assembly detachment. Steer towards the removal of the Steering Wheel module coil after using snap ring pliers on the retaining ring. The installation of the wave washer occurs when required. Insert and position the wave washer carefully along the Steering Shaft assembly block tooth at the 12 o'clock direction. Installation of new inflatable restraint Steering Wheel modules must wait until final installation because their centering tab serves as a pre-installation organizer. Users must verify that their originally used coil maintains proper positioning before further installation steps. Guide the inflatable restraint Steering Wheel module coil to face the horn tower before sliding it onto the Steering Shaft assembly. Use snap ring pliers to install the retaining ring into the race and upper shaft assembly's groove. Then discard the centering tab but ensure the whole retaining ring is seated properly. Put the retaining ring into position using snap ring pliers. Whenever a Steering Wheel has pad control functions you need to add the wire harness assembly. Set the wire harness strap in place before you install upper and lower trim covers as well as the Steering Wheel onto its column. Finally, enable the sir system.