How to replace the rear crankshaft seal on GMC Canyon?

To replace the Crankshaft rear oil seal, you need to remove the Flywheel. The options are to remove it depending on the transmission type, i.e., either manual or automatic transmission. Reasons for doing such are mixed up. Make sure not to damage the Crankshaft or the seal bore during this process. It is important to follow the correct procedures and use the appropriate tools to ensure a successful replacement. Next, pry off the Crankshaft rear oil seal from the Crankshaft rear oil seal housing and discard the old seal. Lightly grease the lip of the new Crankshaft rear oil seal with clean engine oil before installation. Loosely fit the plastic installation sleeve supplied with the new seal to the Crankshaft. Use rear seal installer (J 44215) and driver handle (J 8092) along with a hammer, to put the Crankshaft rear oil seal into the housing, and make sure the sealing is square in the housing while bottoming it out from the engine. Lastly, put the Flywheel back in place using the right procedures.

How to replace the front crankshaft seal on GMC Canyon?

Prior to removing the crank shaft front oil seal, remove the crankshaft balancer, ensuring not to damage the front engine cover or the crankshaft. Next, extract the crankshaft front oil seal using an appropriate tool and remove the old seal. Apply engine oil on the outside diameter of the new crankshaft for oil dealseals before installation. Install the new seal using the Front-Seal Installer (J 45951), remove the Front-Seal Installer (J 45951), and re-install crankshaft balancer.

OEM GMC Canyon Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Crankshaft Seals found

View related parts
GMC Canyon Rear Main Seal, Green Line Part Number: 12591866
$22.96 MSRP: $39.10
You Save: $16.14 (42%)
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Engine Crankshaft Seal; Crankshaft Seal
- Position: Rear
- Replaces: 90298408, 90325572, 90280462, 90354378
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | Base, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS
View related parts
GMC Canyon Rear Main Seal Part Number: 89060436
$24.24 MSRP: $39.93
You Save: $15.69 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Crankshaft Rear Oil; Crankshaft Seal; Seal Kit, Engine Rear Main Bearing; Seal, Engine Rear Main Bearing
- Position: Rear
- Replaces: 12550574, 12585671, 89018162
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Rear Main Seal Part Number: 89018205
$22.51 MSRP: $37.09
You Save: $14.58 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Crankshaft Rear Oil; Crankshaft Seal; Seal, Engine Rear Main Bearing
- Position: Rear
- Replaces: 12568124
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Oil Seal Part Number: 89017622
$17.11 MSRP: $28.18
You Save: $11.07 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Rear Main Bearing; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Engine Front Cover & Crankshaft Seal.
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Rear Main Seal Part Number: 12637710
$42.94 MSRP: $73.74
You Save: $30.80 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal; Rear Main Seal Gasket; Rear Main Seal Retainer
- Position: Rear
- Replaces: 12608748, 12620955, 12592243, 12592242
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 GMC Canyon | Base, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Crankshaft Seal, Front Part Number: 12626923
$19.87 MSRP: $32.73
You Save: $12.86 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Crankshaft Front Oil; Front Crank Seal; Front Seal; Seal, Engine Front Cover & Crankshaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | Base, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS
View related parts
GMC Canyon Rear Main Seal Part Number: 12625417
$20.64 MSRP: $34.01
You Save: $13.37 (40%)
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 GMC Canyon | All Terrain, AT4, Denali, Elevation, SLE, SLT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Canyon Oil Seal, Front Part Number: 12608750
$9.22 MSRP: $15.19
You Save: $5.97 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Crankshaft Seal; Front Crank Seal; Front Seal; Belt Tensioner Seal
- Position: Front
- Replaces: 12592355
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 GMC Canyon | Base, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Front Crank Seal Part Number: 12642203
$12.23 MSRP: $22.96
You Save: $10.73 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal-Crankshaft Front Oil; Seal, Engine Front Cover & Crankshaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 GMC Canyon | All Terrain, AT4, Denali, Elevation, SLE, SLT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Canyon Crankshaft Seal, Front Part Number: 12654010
$4.69 MSRP: $7.72
You Save: $3.03 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Crankshaft Front Oil; Front Crank Seal; Front Seal; Seal, Engine Front Cover & Crankshaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SLE, SLT | 6 Cyl 3.6 L GAS

GMC Canyon Crankshaft Seal

Want to cut long-term maintenance and repair costs? Choose OEM Crankshaft Seal. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Canyon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Canyon Crankshaft Seal includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

It is part of the diesel engine GMC Canyon common rail system, it is situated at the front part of the engine and has a function of sealing the crankcase to ensure that oil does not leak out. Usually manufactured from metal and rubber this round seal is a key element in ensuring the provision of lubrication to the engine hence minimizing wear by reducing friction on the engine's components. Clearly, a GMC Canyon's Crankshaft Seal may get spoiled with constant use over time or when it is of high mileage, there may be signs like oil leaks. While the basic design remains consistent, variations in materials or construction may exist across different model years, but the primary function of the Crankshaft Seal remains the same: so that it is capable to run the car's engine correctly without causing a loss of oil.

GMC Canyon Crankshaft Seal Parts and Q&A

Rear Main Seal
89018205
Q: How to replace the rear crankshaft seal on GMC Canyon?
A:
To replace the Crankshaft rear oil seal, you need to remove the Flywheel. The options are to remove it depending on the transmission type, i.e., either manual or automatic transmission. Reasons for doing such are mixed up. Make sure not to damage the Crankshaft or the seal bore during this process. It is important to follow the correct procedures and use the appropriate tools to ensure a successful replacement. Next, pry off the Crankshaft rear oil seal from the Crankshaft rear oil seal housing and discard the old seal. Lightly grease the lip of the new Crankshaft rear oil seal with clean engine oil before installation. Loosely fit the plastic installation sleeve supplied with the new seal to the Crankshaft. Use rear seal installer (J 44215) and driver handle (J 8092) along with a hammer, to put the Crankshaft rear oil seal into the housing, and make sure the sealing is square in the housing while bottoming it out from the engine. Lastly, put the Flywheel back in place using the right procedures.
Oil Seal
89017622
Q: How to replace the front crankshaft seal on GMC Canyon?
A:
Prior to removing the crank shaft front oil seal, remove the crankshaft balancer, ensuring not to damage the front engine cover or the crankshaft. Next, extract the crankshaft front oil seal using an appropriate tool and remove the old seal. Apply engine oil on the outside diameter of the new crankshaft for oil dealseals before installation. Install the new seal using the Front-Seal Installer (J 45951), remove the Front-Seal Installer (J 45951), and re-install crankshaft balancer.