How to replace the radiator fan and fan shroud on GMC Yukon?

The procedure to change the Radiator fan and shroud (Non-HP2) must start by draining the cooling system fluid. Initiate the process by taking off the air inlet duct and separating the upper Radiator Hose from the Radiator before unclipping the Radiator inlet hose at the fan shroud location. The procedure requires moving the surge tank inlet hose clamp to different positioning before removing the surge tank inlet hose from the Radiator. To proceed with the replacement of the Radiator fan and shroud (Non-HP2) begin by disconnecting electrical connectors from Radiator fans while also removing the clip attaching wiring harness to the shroud and detaching transmission cooler lines bolts from fan shroud. Open the engine oil cooler line clip only if installation requires but also remove all cooler lines. To begin the Radiator fan shroud retainer bolts should be taken out followed by removing the Radiator fan and its shroud. Prepare installation by placing the three lower tabs into the Radiator support flange as you maintain the shroud in line with the Radiator. Fasten the Radiator fan to its position first before securing the shroud bolts at 9 n.m (80 lb in). Proceed by connecting the cooler lines through the clip before closing it yet continue by connecting electrical connectors to Radiator fans alongside fastening the wiring harness clip to the shroud. Twist all transmission cooling line bolts on the fan shroud into place until they reach 4 n.m (35 lb in) torque. The surge tank inlet hose needs installation onto the Radiator followed by adjusting the surge tank inlet hose clamp when needed. Hook the Radiator inlet hose clip at the fan shroud before reconnection of the upper Radiator Hose and air inlet duct installation. Finally, fill the cooling system.

OEM GMC Yukon Radiator fan

Radiator Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Radiator fans found

View related parts
GMC Yukon Fan Blade Part Number: 15017911
$66.27 MSRP: $136.20
You Save: $69.93 (52%)
ADD TO CART
Product Specifications
- Other Name: Blade, Engine Cooling; Radiator Fan Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon Fan Blade Part Number: 89024933
$96.78 MSRP: $198.88
You Save: $102.10 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly
- Replaces: 89023367
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2014 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Fan Blade Part Number: 89023366
$90.19 MSRP: $185.34
You Save: $95.15 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2014 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Fan Blade, Driver Side Part Number: 20903472
$36.35 MSRP: $107.60
You Save: $71.25 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Radiator Fan Assembly; Fan Motor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2014 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.2 L FLEX
View related parts
GMC Yukon Fan Blade Part Number: 15780794
$100.67 MSRP: $206.86
You Save: $106.19 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Fan Blade Part Number: 15780793
$103.31 MSRP: $192.77
You Save: $89.46 (47%)
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Fan & Motor, Passenger Side Part Number: 84580369
$176.93 MSRP: $317.36
You Save: $140.43 (45%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly-Engine Cooling Fan; Radiator Fan Assembly; Fan Motor
- Position: Passenger Side
- Replaced by: 86778037
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Yukon Fan Blade Part Number: 15024813
$55.76 MSRP: $114.57
You Save: $58.81 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade, Engine Cooling; Radiator Fan Assembly; Blade
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.7 L GAS
View related parts
GMC Yukon Fan Blade, Passenger Side Part Number: 20903473
$38.88 MSRP: $79.90
You Save: $41.02 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Radiator Fan Assembly; Fan Motor
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2014 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.2 L FLEX
View related parts
GMC Yukon Fan Blade, Driver Side Part Number: 20897351
$90.92 MSRP: $170.74
You Save: $79.82 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Radiator Fan Assembly; Fan Motor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2014 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.2 L FLEX
View related parts
GMC Yukon Fan Blade, Passenger Side Part Number: 20897350
$82.29 MSRP: $169.10
You Save: $86.81 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Radiator Fan Assembly; Fan Motor
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2014 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 6.2 L FLEX
View related parts
GMC Yukon Fan Blade Part Number: 15992650
Product Specifications
- Other Name: Blade, Engine Cooling; Radiator Fan Assembly; Blade
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 GMC Yukon | SL, SLE, SLT | 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Fan Assembly Part Number: 15717423
Product Specifications
- Other Name: Fan, Engine Air Cooling (Electrical); Radiator Fan Assembly; Auxiliary Fan; Fan, Engine Air Cooling(Electrical)
- Replaces: 15531050
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Fan Blade Part Number: 89024911
Product Specifications
- Other Name: Blade Assembly, Fan; Radiator Fan Assembly; Blade; Blade, Engine Cooling
- Replaces: 15550267, 15657381
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1999 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS
View related parts
GMC Yukon Fan Blade Part Number: 88962938
Product Specifications
- Other Name: Blade, Engine Cooling; Radiator Fan Assembly; Blade
- Replaces: 15719196
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 GMC Yukon | Base, SL, SLE, SLT, Sport | 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Fan Blade Part Number: 15563127
Product Specifications
- Other Name: Fan, Engine Cooling; Radiator Fan Assembly; Blade; Blade, Engine Cooling
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 GMC Yukon | Base, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS
View related parts
GMC Yukon Fan Blade Part Number: 15547033
Product Specifications
- Other Name: Blade, Engine Cooling; Radiator Fan Assembly; Blade; Fan; Blade, Engine Air Cooling(Electrical); Fan, Engine Air Cooling(Electrical)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1995 GMC Yukon | Base, GT, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL

GMC Yukon Radiator fan

Want to cut long-term maintenance and repair costs? Choose OEM Radiator fan. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Yukon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Yukon Radiator fan includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Radiator Fan in GMC Yukon automobiles is of great importance in controlling the excessive temperature of the engine through circulation of air on the radiator. In particular, this process is essential when the vehicle does not move, or its speed does not exceed several tens of kilometers per hour, and there is no natural convection of air. The GMC Yukon comes with both mechanical and electric Radiators Fans; by far, the current models use electrical powered fans, usually 12 V motor-effected. These electric fans work on coolant temperature and can turn on when the air conditioning has been switched on. Mechanical Radiator Fans that are usually fitted on the water pump shafts are run by the crankshaft and incorporate a thermal clutch that de-couples at higher engine speeds to reduce noise and fuel consumption. To the contrary, Fan assemblies are installed on the electric fans since it fit into a shroud assembly to allow free air flow across the radiators. The main distinction between these types lies in their operation: mechanical fans work under control of the engine while electric fans work on the basis of the temperature and A/C needs result the better performance of the GMC Yukon cooling.

GMC Yukon Radiator fan Parts and Q&A

Fan Blade
89024933
Q: How to replace the radiator fan and fan shroud on GMC Yukon?
A:
The procedure to change the Radiator fan and shroud (Non-HP2) must start by draining the cooling system fluid. Initiate the process by taking off the air inlet duct and separating the upper Radiator Hose from the Radiator before unclipping the Radiator inlet hose at the fan shroud location. The procedure requires moving the surge tank inlet hose clamp to different positioning before removing the surge tank inlet hose from the Radiator. To proceed with the replacement of the Radiator fan and shroud (Non-HP2) begin by disconnecting electrical connectors from Radiator fans while also removing the clip attaching wiring harness to the shroud and detaching transmission cooler lines bolts from fan shroud. Open the engine oil cooler line clip only if installation requires but also remove all cooler lines. To begin the Radiator fan shroud retainer bolts should be taken out followed by removing the Radiator fan and its shroud. Prepare installation by placing the three lower tabs into the Radiator support flange as you maintain the shroud in line with the Radiator. Fasten the Radiator fan to its position first before securing the shroud bolts at 9 n.m (80 lb in). Proceed by connecting the cooler lines through the clip before closing it yet continue by connecting electrical connectors to Radiator fans alongside fastening the wiring harness clip to the shroud. Twist all transmission cooling line bolts on the fan shroud into place until they reach 4 n.m (35 lb in) torque. The surge tank inlet hose needs installation onto the Radiator followed by adjusting the surge tank inlet hose clamp when needed. Hook the Radiator inlet hose clip at the fan shroud before reconnection of the upper Radiator Hose and air inlet duct installation. Finally, fill the cooling system.