How to Safely Handle and Replace a Torsion Bar on GMC Canyon?

To remove the Torsion Bar, start by lifting up the car and supporting it so that the front suspension hangs in the rebounds. Mark adjuster bolt and note down numbers of turns to take off for assembly. Take off the adjuster bolt, spacer, and adjuster nut with an observation that the torsion bars are particular to the left and right sides of the car. Next, take off adjustment arms and torsion bars as a unit by sliding it to the rear to detach the lower Control Arm. For installation, put the placement of the adjustment arms and torsion bars side by side with their previous arrangement, and attach the adjustment arm to Torsion Bar, and move the Torsion Bar forward until it is fully engaged with the lower Control Arm. Lastly, install the adjuster bolt, spacer and adjuster nut, lift the vehicle and measure the z-height as specified for trim height specifications.

OEM GMC Canyon Torsion Bar

Suspension Torsion Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Torsion Bars found

View related parts
GMC Canyon Torsion Bar, Front Passenger Side Part Number: 20784587
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Passenger Side
- Replaces: 15167960
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Torsion Bar, Front Driver Side Part Number: 15945637
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Torsion Bar, Front Passenger Side Part Number: 20784593
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Passenger Side
- Replaces: 15945640
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT, WT | 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Torsion Bar, Front Driver Side Part Number: 20784592
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Driver Side
- Replaces: 15945639
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT, WT | 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Torsion Bar, Front Passenger Side Part Number: 20784589
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Passenger Side
- Replaces: 15173585
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Torsion Bar, Front Passenger Side Part Number: 15945638
Product Specifications
- Other Name: Bar-Front Torsion
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Torsion Bar, Front Driver Side Part Number: 19332965
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 20784586, 15167959
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Torsion Bar, Front Passenger Side Part Number: 15100047
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Torsion Bar, Front Driver Side Part Number: 15100046
Product Specifications
- Other Name: Bar-Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Torsion Bar, Front Driver Side Part Number: 19332967
$67.40 MSRP: $105.58
You Save: $38.18 (37%)
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15173584, 20784588
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

GMC Canyon Torsion Bar

Want to cut long-term maintenance and repair costs? Choose OEM Torsion Bar. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Canyon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Canyon Torsion Bar includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Canyon Torsion Bar Parts and Q&A

Torsion Bar, Front Driver Side
19332967
Q: How to Safely Handle and Replace a Torsion Bar on GMC Canyon?
A:
To remove the Torsion Bar, start by lifting up the car and supporting it so that the front suspension hangs in the rebounds. Mark adjuster bolt and note down numbers of turns to take off for assembly. Take off the adjuster bolt, spacer, and adjuster nut with an observation that the torsion bars are particular to the left and right sides of the car. Next, take off adjustment arms and torsion bars as a unit by sliding it to the rear to detach the lower Control Arm. For installation, put the placement of the adjustment arms and torsion bars side by side with their previous arrangement, and attach the adjustment arm to Torsion Bar, and move the Torsion Bar forward until it is fully engaged with the lower Control Arm. Lastly, install the adjuster bolt, spacer and adjuster nut, lift the vehicle and measure the z-height as specified for trim height specifications.